SABIC Innovative Plastics LNP LUBRICOMP EL003 PEI (Europe-Africa-Middle East)

Category	Polymer , Thermoplastic , Polyetherimide (PEI)
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	LNP LUBRICOMP
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics LNP LUBRICOMP EL003 PEI (Europe-Africa-Middle East).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

LNP LUBRICOMP* EL003 is a compound based on Polyetherimide resin containing PTFE. Added features of this material include: Internally Lubricated.

Physical Properties	Metric	English	Comments
Density	1.35 g/cc	0.0488 lb/inÂ³	ASTM D792
	1.35 g/cc	0.0488 lb/inÂ³	ISO 1183
Moisture Absorption	0.210 %	0.210 %	50% RH, 24 hrs; ASTM D570
	0.250 %	0.250 %	23Â°C / 50% RH; ISO 62
Linear Mold Shrinkage, Flow	0.0080 - 0.011 cm/cm @Time 86400 sec	0.0080 - 0.011 in/in @Time 24.0 hour	ASTM D955
	0.0080 - 0.011 cm/cm @Time 86400 sec	0.0080 - 0.011 in/in @Time 24.0 hour	ISO 294
Linear Mold Shrinkage, Transverse	0.0080 - 0.011 cm/cm @Time 86400 sec	0.0080 - 0.011 in/in @Time 24.0 hour	ASTM D955
	0.0080 - 0.011 cm/cm @Time 86400 sec	0.0080 - 0.011 in/in @Time 24.0 hour	ISO 294

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	82.0 MPa	11900 psi	ISO 527
	85.0 MPa	12300 psi	ASTM D638
Tensile Strength, Yield	83.0 MPa	12000 psi	ISO 527
	88.0 MPa	12800 psi	ASTM D638
Elongation at Break	8.1 %	8.1 %	ISO 527
	10.3 %	10.3 %	ASTM D638
Elongation at Yield	6.3 %	6.3 %	ISO 527
	6.5 %	6.5 %	ASTM D638
Tensile Modulus	2.74 GPa	397 ksi	1 mm/min; ISO 527
	2.75 GPa	399 ksi	50 mm/min; ASTM D638
Flexural Strength	130 MPa	18900 psi	ISO 178
	135 MPa	19600 psi	ASTM D790
Flexural Modulus	2.89 GPa	419 ksi	ASTM D790
	3.02 GPa	438 ksi	ISO 178
Izod Impact, Notched	0.690 J/cm	1.29 ft-lb/in	ASTM D256
Izod Impact, Unnotched	7.47 J/cm	14.0 ft-lb/in	ASTM D4812
Izod Impact, Notched (ISO)	8.00 kJ/mÂ²	3.81 ft-lb/inÂ²	80104; ISO 180/1A
Izod Impact, Unnotched (ISO)	61.0 kJ/mÂ²	29.0 ft-lb/inÂ²	80104; ISO 180/1U
Dart Drop, Total Energy	9.00 J	6.64 ft-lb	Instrumented Impact Energy @ peak; ASTM D3763
Impact Test	1.00 J	0.738 ft-lb	Multiaxial Impact; ISO 6603
Coefficient of Friction, Dynamic	0.30	0.30	ASTM D3702 Modified
Coefficient of Friction, Static	0.23	0.23	ASTM D3702 Modified
K (wear) Factor	214 x 10^-8 mmÂ³/N-M	106 x 10^-10 inÂ³-min/ft-lb-hr	Washer; ASTM D3702 Modified

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	47.7 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	26.5 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
	47.8 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	26.6 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
CTE, linear, Transverse to Flow	47.6 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	26.4 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	47.6 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	26.4 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
Deflection Temperature at 1.8 MPa (264 psi)	182 Â°C	360 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
	182 Â°C @Thickness 3.20 mm	360 Â°F @Thickness 0.126 in	unannealed; ASTM D648

Users viewing this material also viewed the following: