Quadrant EPP Acetron® MD POM-C + metal detectable additive, extruded (ISO Data)

Category	Polymer , Thermoplastic , Acetal (POM) , Acetal Copolymer, Unreinforced
Manufacturer	Quadrant Engineering Plastics Products
Trade Name	Acetron®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Quadrant EPP Acetron® MD POM-C + metal detectable additive, extruded (ISO Data).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Metal detectable POM-C grade High mechanical strength, stiffness and hardness Excellent resilience Good creep resistance High impact strength, even at low temperatures Very good dimensional stability (low water absorption) Good sliding properties and wear resistance Excellent machinability Good electrical insulating and dielectric properties Physiologically inert (most grades are suitable for food contact) Not self-extinguishing Food contact compliant according to FDA, and EU Directive 2002/72 EC Continuous use temperature up to 105 °C (221 °F) Metal and visual detection by blue color; metal detection level for particles 3mm x 3mm x 3mm Detection by x-ray also possible

Physical Properties	Metric	English	Comments
Density	1.46 g/cc	0.0527 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	0.19 %	0.19 %	50% RH
Water Absorption at Saturation	0.75 %	0.75 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	86	86	ISO 2039-2
Hardness, Shore D	80	80
Ball Indentation Hardness	155 MPa	22500 psi	ISO 2039-1
Tensile Strength	66.0 MPa	9570 psi	at Yield; ISO 527-1/-2
Elongation at Break	15 %	15 %	ISO 527-1/-2
Elongation at Yield	14 %	14 %	ISO 527-1/-2
Tensile Modulus	2.95 GPa	428 ksi	ISO 527-1/-2
Flexural Strength	93.0 MPa	13500 psi
Flexural Modulus	2.80 GPa	406 ksi
Compressive Strength	25.0 MPa @Strain 1 %	3630 psi @Strain 1 %	ISO 604
	44.0 MPa @Strain 2 %	6380 psi @Strain 2 %	ISO 604
	76.0 MPa @Strain 5 %	11000 psi @Strain 5 %	ISO 604
K Factor (ISO)	45 µm/km	45 µm/km
Charpy Impact Unnotched	7.00 J/cm²	33.3 ft-lb/in²	ISO 179-1/1eU
Charpy Impact, Notched	0.500 J/cm²	2.38 ft-lb/in²	ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.30 - 0.45	0.30 - 0.45

Thermal Properties	Metric	English	Comments
CTE, linear	130 µm/m-°C @Temperature 23.0 - 100 °C	72.2 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.310 W/m-K	2.15 BTU-in/hr-ft²-°F
Melting Point	165 °C	329 °F	DSC, 10°C/min.; ISO 11357-1/-3
Maximum Service Temperature, Air	90.0 °C	194 °F	Continuous; 20,000 h
	105 °C	221 °F	Continuous; 5,000 h
Deflection Temperature at 1.8 MPa (264 psi)	100 °C	212 °F	ISO 75-1/-2
Flammability, UL94	HB	HB
Oxygen Index	<= 20 %	<= 20 %	ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.0e+13 ohm-cm	>= 1.0e+13 ohm-cm	IEC 60093
Surface Resistivity per Square	>= 1.0e+12 ohm	>= 1.0e+12 ohm	IEC 60093

Compliance Properties	Metric	English
3A-Dairy	No	No
European Food 1935/2004	Yes	Yes
FDA	Yes	Yes
USP Class VI	No	No

Chemical Resistance Properties	Metric	English
Acids, Strong (pH 1-3)	Unacceptable	Unacceptable
Acids, Weak	Limited	Limited
Alcohols	Acceptable	Acceptable
Alkalies, Strong (pH 11-14)	Acceptable	Acceptable
Alkalies, Weak	Acceptable	Acceptable
Chlorinated Solvents	Limited	Limited
Continuous Sunlight	Limited	Limited
Hot Water / Steam	Limited	Limited
Hydrocarbons - Aliphatic	Acceptable	Acceptable
Hydrocarbons - Aromatic	Acceptable	Acceptable
Inorganic Salt Solutions	Acceptable	Acceptable
Ketones, Esters	Acceptable	Acceptable

Users viewing this material also viewed the following: