Premix Thermoplastics PRE-ELEC® ESD 12-000 (discontinued **)

Category	Polymer , Thermoplastic , Acetal (POM)
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Premix Thermoplastics PRE-ELEC® ESD 12-000 (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

PRE-ELEC ESD 12-000 is a static dissipative thermoplastic compound based on polyacetal copolymer. The dissipative property is permanent and built into the polymer chain. The products made out of PRE-ELEC ESD 12-000 are washable, reusable and recyclable. Surface resistance values of 108 ohms (EOS/ESD S11.11-1993, IEC 61340-5-1) can be achieved with optimum processing parameters.PRE-ELEC ESD 12-000 can be colored into various bright colors. Test Specimen - 4.0 mm thick, 10.0 mm wide molded rod.Information provided by Premix Thermoplastics Inc.

Physical Properties	Metric	English	Comments
Density	1.35 g/cc	0.0488 lb/in³
Linear Mold Shrinkage	0.018 - 0.022 cm/cm	0.018 - 0.022 in/in	ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	45.0 MPa	6530 psi	ISO 527
Elongation at Break	35 %	35 %	ISO 527
Tensile Modulus	1.38 GPa	200 ksi	ISO 527
Izod Impact, Notched	1.60 J/cm @Thickness 4.00 mm, Temperature 23.0 °C	3.00 ft-lb/in @Thickness 0.157 in, Temperature 73.4 °F	ISO 180
Izod Impact, Unnotched	NB @Thickness 4.00 mm, Temperature 23.0 °C	NB @Thickness 0.157 in, Temperature 73.4 °F	ISO 180

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	100 °C	212 °F	ISO 75/Method Af

Electrical Properties	Metric	English	Comments
Volume Resistivity	<= 1.00e+8 ohm-cm	<= 1.00e+8 ohm-cm	ISO D-257
Surface Resistance	1.00e+9 - 1.00e+11 ohm	1.00e+9 - 1.00e+11 ohm	ISO D-257
Static Decay	<= 2.0 sec	<= 2.0 sec	ISO IEC 61340-5-1

Processing Properties	Metric	English	Comments
Melt Temperature	185 - 210 °C	365 - 410 °F
Mold Temperature	80.0 - 105 °C	176 - 221 °F
Drying Temperature	80.0 °C @Time 10800 - 14400 sec	176 °F @Time 3.00 - 4.00 hour	Pre-drying in a dehumidifier
Injection Pressure	60.0 - 80.0 MPa	8700 - 11600 psi

Descriptive Properties	Value	Comments
Injection Speed	Moderate

Users viewing this material also viewed the following: