Premix Thermoplastics PRE-ELEC® CP 1315 (discontinued **)

Category	Polymer , Thermoplastic , Polyolefin
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Premix Thermoplastics PRE-ELEC® CP 1315 (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

PRE-ELEC CP 1315 is a conductive thermoplastic compound based on a polyolefin copolymer. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC CP 1315 has excellent mechanical properties and is easy to extrude or injection mould.Typical applications include flexible extruded profiles and tubes and flexible injection molded parts. Test Specimen - 4.0 mm thick, 10.0 mm wide molded rod.Information provided by Premix Thermoplastics Inc.

Physical Properties	Metric	English	Comments
Density	1.01 g/cc	0.0365 lb/in³
Linear Mold Shrinkage	0.014 - 0.018 cm/cm	0.014 - 0.018 in/in	ISO 294-4
Melt Flow	5.0 g/10 min @Load 5.00 kg, Temperature 190 °C	5.0 g/10 min @Load 11.0 lb, Temperature 374 °F	ISO 1133
High Load Melt Index	25 g/10 min @Load 21.6 kg, Temperature 190 °C	25 g/10 min @Load 47.6 lb, Temperature 374 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	97	97	ISO 868
Hardness, Shore D	45	45	ISO 868
Tensile Strength, Yield	13.0 MPa	1890 psi	ISO 527
Elongation at Break	150 %	150 %	ISO 527
Modulus of Elasticity	0.200 GPa	29.0 ksi	ISO 178
Izod Impact, Notched	NB @Thickness 4.00 mm, Temperature 23.0 °C	NB @Thickness 0.157 in, Temperature 73.4 °F	ISO 180
Izod Impact, Unnotched	NB @Thickness 4.00 mm, Temperature 23.0 °C	NB @Thickness 0.157 in, Temperature 73.4 °F	ISO 180

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	46.0 °C	115 °F	ISO 75/Method Bf
Vicat Softening Point	73.0 °C	163 °F	Rate A; ISO 306/A50

Electrical Properties	Metric	English	Comments
Volume Resistivity	<= 10000 ohm-cm	<= 10000 ohm-cm	ISO D-257
Surface Resistance	<= 1e+05	<= 1e+05	ISO D-257

Processing Properties	Metric	English	Comments
Middle Barrel Temperature	180 °C	356 °F	Zone 1; Cylinder
	180 °C	356 °F	Zone 2; Cylinder
	190 °C	374 °F	Zone 3; Cylinder
	190 °C	374 °F	Zone 4; Cylinder
	200 °C	392 °F	Zone 5; Cylinder
	200 °C	392 °F	Zone 6; Cylinder
Die Temperature	190 °C	374 °F	Zone 3
	200 °C	392 °F	Zone 4
	200 °C	392 °F	Zone 1
	200 °C	392 °F	Zone 2
	200 °C	392 °F	Zone 5
Melt Temperature	180 - 220 °C	356 - 428 °F
Mold Temperature	40.0 - 60.0 °C	104 - 140 °F
Roll Temperature	50.0 °C	122 °F	3rd Roll
	60.0 °C	140 °F	2nd Roll
	70.0 °C	158 °F	1st Roll
Drying Temperature	60.0 °C @Time >=10800 sec	140 °F @Time >=3.00 hour	If stored for longer than 1 year
Moisture Content	<= 0.15 %	<= 0.15 %	When Produced
Injection Pressure	60.00 MPa	8702 psi
Shelf Life	12.0 Month	12.0 Month	Normal Storing Conditions

Descriptive Properties	Value	Comments
Appearance	Granule
Color	Black
Injection Speed	Moderate

Users viewing this material also viewed the following: