- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- Polycarbonate, Impact Modified
- Polyram RamTough PZ726 Polycarbonate, Impact Modified, UV Stabilized
Polyram RamTough PZ726 Polycarbonate, Impact Modified, UV Stabilized
| Category | Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, Impact Modified |
| Manufacturer | Polyram |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram RamTough PZ726 Polycarbonate, Impact Modified, UV Stabilized.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
An impact modified, UV stabilized polycarbonate for injection molding applications.Information provided by Polyram.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.20 g/cc | 0.0434 lb/in³ | ISO 1183 |
| Linear Mold Shrinkage | 0.0050 - 0.0080 cm/cm | 0.0050 - 0.0080 in/in | ISO 2577 |
| Melt Flow | 17 g/10 min @Load 1.20 kg, Temperature 300 °C |
17 g/10 min @Load 2.65 lb, Temperature 572 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 62.0 MPa | 8990 psi | ISO 527 |
| Elongation at Break | 120 % | 120 % | ISO 527 |
| Flexural Strength | 98.0 MPa | 14200 psi | ISO 178 |
| Flexural Modulus | 2.40 GPa | 348 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 94.0 kJ/m² | 44.7 ft-lb/in² | ISO 180 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 130 °C | 266 °F | ISO 75 |
| Vicat Softening Point | 148 °C | 298 °F | ISO 306 |
| Flammability, UL94 | V-2 @Thickness 1.60 mm |
V-2 @Thickness 0.0630 in |
|
| Glow Wire Test | 825 °C | 1520 °F | G.W.I.T; IEC 60695 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | IEC 60093 |
| Surface Resistance | 1.00e+15 ohm | 1.00e+15 ohm | IEC 60093 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Cycolac® INP449 ABS+SAN
- Nilit FRIANYL A63 V0 G5 Nylon 6.6 for injection molding, 25% glass fiber reinforced
- Chevron Phillips HiD® 9302 HDPE Yellow Pipe Resin (discontinued **)
- Kazanorgsintez Propylene
- Michelman® Michem® Emulsion 11226 Cationic polypropylene emulsion
- DuPont Nucrel® 925 Ethylene-Methacrylic Acid Copolymer Resin
- A. Schulman POLYBATCH™ Hot Sauce Red 50323/2 Concentrate Based In LLDPE
- Loctite® 25062 Methacrylate Base Surface Primer
- ChevronTexaco Regal® EP 46
Copyright © lookpolymers.com All Rights Reserved