- HOME
- POLYMER SEARCH
- Thermoplastic
- ABS Polymer
- Acrylonitrile Butadiene Styrene (ABS), Molded
- Polyram RamShine PV101 Acrylonitrile Butadiene Styrene
Polyram RamShine PV101 Acrylonitrile Butadiene Styrene
| Category | Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Molded |
| Manufacturer | Polyram |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram RamShine PV101 Acrylonitrile Butadiene Styrene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
General purpose ABS for injection molding applications.Information provided by Polyram.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.03 g/cc | 0.0372 lb/in³ | ISO 1183 |
| Moisture Absorption at Equilibrium | 0.22 % | 0.22 % | 50% RH; ISO 62 |
| Water Absorption at Saturation | 1.0 % | 1.0 % | ISO 62 |
| Linear Mold Shrinkage | 0.0050 cm/cm | 0.0050 in/in | ISO 2577 |
| Melt Flow | 18 g/10 min @Load 10.0 kg, Temperature 220 °C |
18 g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 40.0 MPa | 5800 psi | ISO 527 |
| Elongation at Break | 10 % | 10 % | ISO 527 |
| Tensile Modulus | 2.30 GPa | 334 ksi | ISO 527 |
| Flexural Strength | 65.0 MPa | 9430 psi | ISO 178 |
| Flexural Modulus | 3.00 GPa | 435 ksi | ISO 178 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 105 °C | 221 °F | ISO 75 |
| Deflection Temperature at 1.8 MPa (264 psi) | 100 °C | 212 °F | ISO 75 |
| Flammability, UL94 | HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | IEC 60093 |
| Surface Resistance | 1.00e+13 ohm | 1.00e+13 ohm | IEC 60093 |
Users viewing this material also viewed the following:
- Park Electrochemical Nelco® NX9245 PTFE Laminate, Woven-Glass Reinforced
- Chevron Phillips HiD® 9330 HDPE Natural Pipe Resin (discontinued **)
- Solvay Specialty Polymers Diofan® A 602 Polyvinylidene Chloride (PVDC)
- Styron CALIBREâ„¢ 701 15 Polycarbonate, General Purpose
- Styron DL 216 NAD Carboxylated SB
- Tipco Tipcolite® TPF 1011 - Unreinforced Thermoset Phenolic Resin, 43 mm Norton Flow without Hexamine
- DuPont Performance Polymers Zytel® 79G13L NC010 Nylon 66 (Unverified Data**)
- Arkema Group LOTADER® 4503 Terpolymer Ethylene - Acrylic Ester - Maleic Anhydride
- ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material
- 3M Scotch-Weld™ CA40 Instant Adhesive
Copyright © lookpolymers.com All Rights Reserved