Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polyram PlusTek PB318G9 Nylon 6 for Injection Molding, 45% Glass-fiber Reinforced, UV Stabilized

Category Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 50% Glass Fiber Filled
Manufacturer Polyram
Trade Name PlusTek
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Polyram PlusTek PB318G9 Nylon 6 for Injection Molding, 45% Glass-fiber Reinforced, UV Stabilized.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
45% Glass-fiber reinforced Nylon 6, UV stabilized for injection molding applications.Information provided by Polyram.
Physical Properties Metric English Comments
Density 1.50 g/cc
0.0542 lb/in³
ISO 1183
Water Absorption at Saturation 4.9 %
4.9 %
ISO 62
Linear Mold Shrinkage 0.0015 - 0.0040 cm/cm
0.0015 - 0.0040 in/in
ISO 2577
Mechanical Properties Metric English Comments
Tensile Strength, Yield 210 MPa
30500 psi
ISO 527
Elongation at Break 2.8 %
2.8 %
ISO 527
Tensile Modulus 14.2 GPa
2060 ksi
ISO 527
Flexural Strength 280 MPa
40600 psi
ISO 178
Flexural Modulus 11.4 GPa
1650 ksi
ISO 178
Izod Impact, Notched (ISO) 18.0 kJ/m²
8.57 ft-lb/in²
ISO 180
Thermal Properties Metric English Comments
Melting Point 218 °C
424 °F
ISO 11357
Maximum Service Temperature, Air 110 °C
230 °F
Continuous use
200 °C
392 °F
Short peaks operation
Deflection Temperature at 0.46 MPa (66 psi) 220 °C
428 °F
ISO 75
Deflection Temperature at 1.8 MPa (264 psi) 215 °C
419 °F
ISO 75
Flammability, UL94 HB

@Thickness 3.00 mm
 HB

@Thickness 0.118 in
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+12 ohm-cm
1.00e+12 ohm-cm
IEC 60093
Dielectric Strength 65.0 kV/mm
1650 kV/in
IEC 60250
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved