Polymer Resources TP-GP1 Polybutylene Terephthalate, General Purpose, Flow Modified

Category	Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT) , Polybutylene Terephthalate (PBT), Unreinforced, Molded
Manufacturer	Polymer Resources, LTD
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Polymer Resources TP-GP1 Polybutylene Terephthalate, General Purpose, Flow Modified.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Polybutylene Terephthalate, General Purpose, Flow ModifiedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Polymer Resources Corporation.

Physical Properties	Metric	English	Comments
Specific Gravity	1.31 g/cc	1.31 g/cc	ASTM D792
Linear Mold Shrinkage	0.016 - 0.022 cm/cm	0.016 - 0.022 in/in	ASTM D955
Melt Flow	12 - 25 g/10 min @Load 2.16 kg, Temperature 250 °C	12 - 25 g/10 min @Load 4.76 lb, Temperature 482 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	78	78	ASTM D785
Hardness, Rockwell R	117	117	ASTM D785
Tensile Strength at Break	48.3 MPa	7000 psi	ASTM D638
Tensile Strength, Yield	48.3 MPa	7000 psi	ASTM D638
Elongation at Break	200 %	200 %	ASTM D638
Elongation at Yield	3.5 %	3.5 %	ASTM D638
Flexural Strength	79.3 MPa	11500 psi	ASTM D790
Flexural Modulus	2.31 GPa	335 ksi	ASTM D790
Izod Impact, Notched	0.534 J/cm @Temperature 22.8 °C	1.00 ft-lb/in @Temperature 73.0 °F	ASTM D256
Charpy Impact, Notched	0.525 J/cm² @Temperature 22.8 °C	2.50 ft-lb/in² @Temperature 73.0 °F	ISO 179/1eA
Gardner Impact	16.9 J	12.5 ft-lb	ASTM D3029

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	149 °C	300 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	52.8 °C	127 °F	ASTM D648
Vicat Softening Point	190 °C	374 °F	ISO 306/B50
Flammability, UL94	HB @Thickness 1.59 mm	HB @Thickness 0.0626 in
	HB @Thickness 3.17 mm	HB @Thickness 0.125 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	ASTM D257
Dielectric Constant	3.1 @Frequency 1.00e+6 Hz	3.1 @Frequency 1.00e+6 Hz	ASTM D150
	3.3 @Frequency 100 Hz	3.3 @Frequency 100 Hz	ASTM D150
Dielectric Strength	15.4 kV/mm @Thickness 3.17 mm	390 kV/in @Thickness 0.125 in	in air; ASTM D149
	15.4 kV/mm @Thickness 3.17 mm	390 kV/in @Thickness 0.125 in	in oil; ASTM D149
	22.8 kV/mm @Thickness 1.59 mm	580 kV/in @Thickness 0.0625 in	in air; ASTM D149
Dissipation Factor	0.0020 @Frequency 100 Hz	0.0020 @Frequency 100 Hz	ASTM D150
	0.020 @Frequency 1.00e+6 Hz	0.020 @Frequency 1.00e+6 Hz	ASTM D150

Processing Properties	Metric	English
Rear Barrel Temperature	232 - 249 °C	450 - 480 °F
Middle Barrel Temperature	238 - 254 °C	460 - 490 °F
Front Barrel Temperature	243 - 260 °C	470 - 500 °F
Melt Temperature	232 - 260 °C	450 - 500 °F
Mold Temperature	43.3 - 76.7 °C	110 - 170 °F
Drying Temperature	116 - 121 °C	240 - 250 °F
Dry Time	3.00 - 4.00 hour	3.00 - 4.00 hour

Descriptive Properties	Value	Comments
Vent	0.0005

Users viewing this material also viewed the following: