- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Polykemi AB POLYelast TPE Z900 Thermoplastic Elastomer, SEBS-based
Polykemi AB POLYelast TPE Z900 Thermoplastic Elastomer, SEBS-based
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Polykemi AB |
| Trade Name | POLYelast |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polykemi AB POLYelast TPE Z900 Thermoplastic Elastomer, SEBS-based.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Polykemi AB
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.900 g/cc | 0.0325 lb/in³ | ISO 1183 |
| Linear Mold Shrinkage | 0.017 - 0.024 cm/cm | 0.017 - 0.024 in/in | With Flow; ISO 2577 |
| 0.017 - 0.024 cm/cm | 0.017 - 0.024 in/in | Across Flow; ISO 2577 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 90 @Time 15.0 sec |
90 @Time 0.00417 hour |
Polykemi |
| Tensile Strength at Break | <= 14.0 MPa | <= 2030 psi | ISO/R527 |
| Elongation at Break | 450 % | 450 % | ISO/R527 |
| 100% Modulus | 0.00450 GPa | 0.653 ksi | ISO/R527 |
| 300% Modulus | 0.00620 GPa | 0.899 ksi | ISO/R527 |
| Tear Strength | 45.0 kN/m | 257 pli | D624 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 180 - 220 °C | 356 - 428 °F | |
| Mold Temperature | 20.0 - 40.0 °C | 68.0 - 104 °F | |
| Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Holding Pressure () | Low | % of injection pressure |
| Injection Pressure | Low | |
| Injection Speed () | High |
Users viewing this material also viewed the following:
- Park Electrochemical Nelcote® F-562 Phenolic Prepreg, C2 Carbonized Rayon Reinforced
- Kingfa JH960 6111 Non-halogenated Flame Retardant PC/ABS Alloy
- Kraton® G1654 E (SEBS) Linear Block Copolymer
- Gwent Electronic Materials C2030701D3 Solderable Silver Ink
- Hannam Chemical Hanalac 795 ABS, Pipe Grade
- SABIC Innovative Plastics Ultem 2212 PEI (Europe-Africa-Middle East)
- Shin-Etsu Silicones USG-104 Fluid
- DuPont Performance Polymers Crastin® FGS600F40 NC010 Polybutylene Terephthalate (PBT) (Unverified Data**)
- BASF Ultramid® 8255 HS PA6 (Dry)
Copyright © lookpolymers.com All Rights Reserved