Lubrizol Estane® 2102-55D Thermoplastic Polyurethane Elastomer

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Polyester Grade
Manufacturer	Lubrizol (former Noveon)
Trade Name	ESTANE®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Lubrizol Estane® 2102-55D Thermoplastic Polyurethane Elastomer.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Formerly PellethaneFeature: Load-bearing capacityAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by Lubrizol.Lubrizol acquired the Pellethane product line from Dow in 2009.

Physical Properties	Metric	English	Comments
Density	1.21 g/cc	0.0437 lb/in³	ASTM D792
Linear Mold Shrinkage, Flow	0.0050 - 0.0070 cm/cm	0.0050 - 0.0070 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0060 - 0.0090 cm/cm	0.0060 - 0.0090 in/in	ASTM D955
Melt Flow	14 g/10 min @Load 2.16 kg, Temperature 224 °C	14 g/10 min @Load 4.76 lb, Temperature 435 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	58	58	ASTM D2240
Tensile Strength, Ultimate	49.5 MPa	7180 psi	ASTM D412
Elongation at Break	415 %	415 %	ASTM D412
50% Modulus	0.0153 GPa	2.22 ksi	ASTM D412
100% Modulus	0.0162 GPa	2.35 ksi	ASTM D412
300% Modulus	0.0359 GPa	5.21 ksi	ASTM D412
Flexural Modulus	0.172 GPa	24.9 ksi	ASTM D790
Tear Strength	179 kN/m	1020 pli	Die C; ASTM D624
Taber Abrasion, mg/1000 Cycles	60	60	H22 Wheel, 1000g; ASTM D1044
Compression Set	25 % @Temperature 25.0 °C, Time 79200 sec	25 % @Temperature 77.0 °F, Time 22.0 hour	ASTM D395, Method B
	27 % @Temperature 70.0 °C, Time 79200 sec	27 % @Temperature 158 °F, Time 22.0 hour	ASTM D395, Method B
Tensile Set	30 %	30 %	Elongation set after break; ASTM D412

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	135 µm/m-°C @Temperature 20.0 °C	75.0 µin/in-°F @Temperature 68.0 °F	ASTM D636
Vicat Softening Point	118 °C	244 °F	120°C/hr, 9.8N; ASTM D1525

Processing Properties	Metric	English	Comments
Melt Temperature	204 - 221 °C	399 - 430 °F	Molding
Mold Temperature	16.0 - 60.0 °C	60.8 - 140 °F
Drying Temperature	88.0 - 104 °C	190 - 219 °F	air dew point <-40°C

Users viewing this material also viewed the following: