POLYMER SEARCH

Polycasa COPOL PETG

Category	Polymer , Thermoplastic , Polyester, TP , Polyethylene Terephthalate (PET)
Manufacturer	Polycasa
Trade Name	COPOL
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Polycasa COPOL PETG.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

QUINN COPOL has good optical properties, brilliant surface, easy to vacuum form without pre-drying, low water absorption, very good chemical resistance, and high impact properties.Bus shelters (UV-version)Poster glazingMachine guardsMedical appliance packagingDisplaysRefrigerators and cold storeroom equipmentLenticular lenses / Graphic ArtsLighting controllers for hazardous areasQuinn Manufacturing Group rebranded its Plastics Division as Polycasa in 2013.

Physical Properties	Metric	English	Comments
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	53.0 MPa	7690 psi	ISO 527-2
Elongation at Break	14 %	14 %	ISO 527-2
Tensile Modulus	2.40 GPa	348 ksi	ISO 527-2
Flexural Strength	85.0 MPa	12300 psi	ISO 178
Flexural Modulus	2.35 GPa	341 ksi	ISO 178
Charpy Impact Unnotched	NB	NB	ISO 179-1
Charpy Impact, Notched	0.153 J/cm²	0.728 ft-lb/in²	ISO 179-1

Thermal Properties	Metric	English	Comments
CTE, linear	59.0 µm/m-°C @Temperature 20.0 °C	32.8 µin/in-°F @Temperature 68.0 °F	DIN 53752
Thermal Conductivity	0.162 W/m-K	1.12 BTU-in/hr-ft²-°F	DIN 52612
Maximum Service Temperature, Air	69.0 °C	156 °F
Deflection Temperature at 0.46 MPa (66 psi)	69.0 °C	156 °F	ISO 75-2
Deflection Temperature at 1.8 MPa (264 psi)	64.0 °C	147 °F	ISO 75-2
Vicat Softening Point	78.0 °C	172 °F	ISO 306
Decomposition Temperature	>= 280 °C	>= 536 °F

Optical Properties	Metric	English	Comments
Haze	<= 1.1 %	<= 1.1 %
Transmission, Visible	87 %	87 %	DIN 5036-3

Electrical Properties	Metric	English	Comments
Volume Resistivity	6.05e+14 ohm-cm	6.05e+14 ohm-cm	IEC 93
Surface Resistance	6.62e+14 ohm	6.62e+14 ohm	IEC 93
Dielectric Constant	3.3 @Frequency 1000 Hz	3.3 @Frequency 1000 Hz
Dielectric Strength	10.7 kV/mm	272 kV/in	IEC 60243
Dissipation Factor	0.020 @Frequency 50 Hz	0.020 @Frequency 50 Hz	IEC 250

Processing Properties	Metric	English	Comments
Processing Temperature	120 - 160 °C	248 - 320 °F	Sheet Forming

Users viewing this material also viewed the following: