PolyOne Trilliant™ HC HC0200-5001 XR Grey Thermoplastic Elastomer (TPE)

Category	Polymer , Thermoplastic , Elastomer, TPE
Manufacturer	PolyOne Corporation
Trade Name	Trilliant™
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	PolyOne Trilliant™ HC HC0200-5001 XR Grey Thermoplastic Elastomer (TPE).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

The Trilliant® specialty compounds offer a complete system of specialty engineered materials, certified processes, services and technical support that enable healthcare OEM's to get to market ahead of competition. When specified, Trilliant® compound may incorporate agency rated materials that meet USP Class IV, FDA or ISO 10993 testing requirements. This Trilliant® grade is a high density specialty compound featuring a sustainable material solution for radiation shielding and weighting & balancing applications. The composite material offers a high performance thermoplastic-based alternative to lead. This compound has densities similar to traditional metals and provides greater flexibility in design and processing.Shielding properties: Attenuation coefficient at 511 keV = 0.83cm-1 Half Thickness at 511 keV = 0.84cmInformation provided by PolyOne

Physical Properties	Metric	English	Comments
Density	8.00 g/cc	0.289 lb/in³	ISO 1183
Linear Mold Shrinkage	0.0050 - 0.015 cm/cm	0.0050 - 0.015 in/in	ISO 294-4

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	85	85	ISO 868
Tensile Strength at Break	3.00 MPa	435 psi	ISO 37
Elongation at Break	200 %	200 %	ISO 37
Compression Set	20 - 30 % @Temperature 23.0 °C, Time 259000 sec	20 - 30 % @Temperature 73.4 °F, Time 72.0 hour	ISO 815
	80 - 90 % @Temperature 70.0 °C, Time 79200 sec	80 - 90 % @Temperature 158 °F, Time 22.0 hour	ISO 815

Thermal Properties	Metric	English	Comments
Thermal Conductivity	1.00 - 2.00 W/m-K	6.94 - 13.9 BTU-in/hr-ft²-°F	Through Plane; ASTM E1461

Electrical Properties	Metric	English	Comments
Surface Resistance	1.00e+6 - 1.00e+9 ohm	1.00e+6 - 1.00e+9 ohm	IEC 60093

Processing Properties	Metric	English
Melt Temperature	200 - 220 °C	392 - 428 °F
Mold Temperature	20.0 - 40.0 °C	68.0 - 104 °F
Drying Temperature	80.0 °C	176 °F
Dry Time	4.00 hour	4.00 hour

Descriptive Properties	Value	Comments
Appearance	Grey
Features	High Specific Gravity
	Non-Toxic
Forms	Pellets
Generic Material	TPE
Generic Name	Thermoplastic Elastomer (TPE)
Processing Method	Injection Molding
Regional Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Uses	Housings
	Medical/Healthcare Applications
	Radiation Shielding
	Weighting & Balancing

Users viewing this material also viewed the following: