Plastcom PLASTALEN® PH 52 T 20 Polypropylene reinforced with mineral filler

Category	Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Mineral Reinforced
Manufacturer	Plastcom spol. s r.o.
Trade Name	PLASTALEN®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Plastcom PLASTALEN® PH 52 T 20 Polypropylene reinforced with mineral filler.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

PP homopolymer for injection molding with the content of 20 % mineral filler, heat stabilized. Application in automotive industry. Delivered in black grade.Information Provided by Plastcom spol. s r.o.

Physical Properties	Metric	English	Comments
Density	1.08 g/cc	0.0390 lb/in³	STN EN ISO 1183-1
Filler Content	20 %	20 %
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	STN EN ISO 294-4
Linear Mold Shrinkage, Transverse	0.012 cm/cm	0.012 in/in	STN EN ISO 294-4
Melt Flow	10 g/10 min @Load 2.16 kg, Temperature 230 °C	10 g/10 min @Load 4.76 lb, Temperature 446 °F	STN EN ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	25.0 MPa	3630 psi	STN EN ISO 527-2
Elongation at Break	5.0 %	5.0 %	STN EN ISO 527-2
Tensile Modulus	2.00 GPa	290 ksi	STN EN ISO 527-2
Flexural Strength	35.0 MPa	5080 psi	STN EN ISO 178
Flexural Modulus	1.70 GPa	247 ksi	STN EN ISO 178
Charpy Impact Unnotched	1.30 J/cm² @Temperature -20.0 °C	6.19 ft-lb/in² @Temperature -4.00 °F	STN EN ISO 179
	3.20 J/cm² @Temperature 23.0 °C	15.2 ft-lb/in² @Temperature 73.4 °F	STN EN ISO 179
Charpy Impact, Notched	0.130 J/cm² @Temperature -20.0 °C	0.619 ft-lb/in² @Temperature -4.00 °F	STN EN ISO 179
	0.230 J/cm² @Temperature 23.0 °C	1.09 ft-lb/in² @Temperature 73.4 °F	STN EN ISO 179

Thermal Properties	Metric	English	Comments
Melting Point	160 °C	320 °F	STN EN 11357-1
Deflection Temperature at 1.8 MPa (264 psi)	125 °C	257 °F	STN EN ISO 75-2 (A)
Vicat Softening Point	115 °C	239 °F	STN EN ISO 306
Flammability, UL94	HB	HB

Processing Properties	Metric	English	Comments
Melt Temperature	200 - 250 °C	392 - 482 °F
Mold Temperature	40.0 - 70.0 °C	104 - 158 °F
Drying Temperature	80.0 °C @Time 14400 sec	176 °F @Time 4.00 hour
Moisture Content	0.10 %	0.10 %	STN EN ISO 3344
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi

Descriptive Properties	Value	Comments
Color	Black

Users viewing this material also viewed the following: