POLYMER SEARCH

Plaskolite PL-24 Acrylic Resin

Category	Polymer , Thermoplastic , Acrylic (PMMA) , Acrylic, General Purpose, Molded
Manufacturer	Plaskolite
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Plaskolite PL-24 Acrylic Resin.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

For injection molding. An unlubricated version of PL-25 extrusion grade pellets. Highest molecular weight, maximum heat resistance.Information supplied by the manufacturer.

Physical Properties	Metric	English	Comments
Density	1.19 g/cc	0.0430 lb/in³	ASTM D792
Water Absorption	0.30 %	0.30 %	ASTM D570
Linear Mold Shrinkage	0.0030 - 0.0070 cm/cm	0.0030 - 0.0070 in/in	ASTM D955
Melt Flow	2.5 g/10 min	2.5 g/10 min	ASTM D1238I

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	72.0 MPa	10400 psi	ASTM D638
Modulus of Elasticity	2.96 GPa	429 ksi	ASTM D638
Flexural Yield Strength	110 MPa	16000 psi	ASTM D790
Izod Impact, Notched	0.210 J/cm	0.393 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	54.0 µm/m-°C @Temperature 17.0 - 37.0 °C	30.0 µin/in-°F @Temperature 62.6 - 98.6 °F	ASTM D696
Specific Heat Capacity	1.46 J/g-°C	0.349 BTU/lb-°F
Thermal Conductivity	0.200 W/m-K	1.39 BTU-in/hr-ft²-°F	ASTM C177
Melting Point	157 °C	315 °F	Flow Temperature; ASTM D569
Maximum Service Temperature, Air	92.0 °C	198 °F	Deflection Temperature with load unspecified; ASTM D648
Flammability, UL94	HB	HB

Optical Properties	Metric	English	Comments
Refractive Index	1.49	1.49	ASTM D542
Transmission, Visible	92 %	92 %	ASTM D1003

Electrical Properties	Metric	English	Comments
Dielectric Constant	3.7 @Frequency 60 Hz	3.7 @Frequency 60 Hz	ASTM D150
Dissipation Factor	0.050 @Frequency 60 Hz	0.050 @Frequency 60 Hz	ASTM D150

Users viewing this material also viewed the following: