Overview of materials for Nylon 11 with PTFE Filler

Category	Polymer , Thermoplastic , Nylon , Nylon 11 , Nylon 11 with PTFE Filler
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Overview of materials for Nylon 11 with PTFE Filler.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

This property data is a summary of similar materials in the MatWeb database for the category "Nylon 11 with PTFE Filler". Each property range of values reported is minimum and maximum values of appropriate MatWeb entries. The comments report the average value, and number of data points used to calculate the average. The values are not necessarily typical of any specific grade, especially less common values and those that can be most affected by additives or processing methods.

Physical Properties	Metric	English	Comments
Density	1.09 - 1.15 g/cc	0.0394 - 0.0415 lb/in³	Average value: 1.11 g/cc Grade Count:5
Linear Mold Shrinkage	0.0130 - 0.0250 cm/cm	0.0130 - 0.0250 in/in	Average value: 0.0169 cm/cm Grade Count:5

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	34.5 - 48.3 MPa	5000 - 7000 psi	Average value: 40.7 MPa Grade Count:5
Elongation at Break	10.0 %	10.0 %	Average value: 10.0 % Grade Count:5
Modulus of Elasticity	1.38 - 1.72 GPa	200 - 250 ksi	Average value: 1.54 GPa Grade Count:5
Flexural Yield Strength	44.8 - 55.2 MPa	6500 - 8000 psi	Average value: 49.6 MPa Grade Count:5
Flexural Modulus	1.38 - 1.72 GPa	200 - 250 ksi	Average value: 1.59 GPa Grade Count:5
Izod Impact, Notched	0.534 - 0.747 J/cm	1.00 - 1.40 ft-lb/in	Average value: 0.651 J/cm Grade Count:5
Izod Impact, Unnotched	10.7 - 5340 J/cm	20.0 - 10000 ft-lb/in	Average value: 12.0 J/cm Grade Count:5

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	48.9 - 54.4 °C	120 - 130 °F	Average value: 51.1 °C Grade Count:5
Flammability, UL94	HB	HB	Grade Count:4

Processing Properties	Metric	English	Comments
Processing Temperature	216 - 282 °C	420 - 540 °F	Average value: 243 °C Grade Count:4
Mold Temperature	37.8 - 104 °C	100 - 220 °F	Average value: 71.7 °C Grade Count:5
Injection Pressure	68.9 - 103 MPa	10000 - 15000 psi	Average value: 86.2 MPa Grade Count:5

Users viewing this material also viewed the following: