- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, 30% Glass Fiber Filled
- NYCOA 2256 30% Glass Filled Nylon 6
NYCOA 2256 30% Glass Filled Nylon 6
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 30% Glass Fiber Filled |
| Manufacturer | NYCOA, Inc. |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | NYCOA 2256 30% Glass Filled Nylon 6.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
30% glass filled, impact modified nylon 6Information provided by NYCOA, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.33 g/cc | 0.0480 lb/in³ | ISO 1183-A |
| Water Absorption | 0.95 % | 0.95 % | ISO METHOD 62 |
| Linear Mold Shrinkage | 0.015 cm/cm | 0.015 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 131 MPa | 19000 psi | ISO METHOD 527 |
| Elongation at Break | 8.0 % | 8.0 % | ISO METHOD 527 |
| Flexural Yield Strength | 160 MPa | 23200 psi | ISO METHOD 176 |
| Flexural Modulus | 6.813 GPa | 988.2 ksi | ISO METHOD 178 |
| Izod Impact, Notched | 1.18 J/cm | 2.21 ft-lb/in | ISO METHOD 180 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 221 °C | 430 °F | ISO METHOD 3146C |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 250 °C | 482 °F | |
| Rear Barrel Temperature | 225 °C | 437 °F | |
| Middle Barrel Temperature | 230 °C | 446 °F | |
| Front Barrel Temperature | 250 °C | 482 °F | |
| Nozzle Temperature | 250 °C | 482 °F | |
| Mold Temperature | 80.0 °C | 176 °F | |
| Drying Temperature | 76.0 °C | 169 °F |
Users viewing this material also viewed the following:
- MV Labs LI1000 Li2SO4 Lithium sulfate
- RheTech Products HP800-706UV 20% Talc Reinforced High Performance Polypropylene Copolymer, Scratch Resistant, UV Stabilized, Impact Modified, SWB White
- Overview of materials for Polychlorotrifluoroethylene; Molded
- Lucite International Colacryl ® B866 Acrylic Dental Resin
- Samsung Cheil Industries Infino® HR-1008B PC/ABS, Unreinforced
- Sax Polymers SAXAMID 226F6T3 Nylon 6.6, 30% Glass Fiber
- Teknor Apex Sinpolene MBB2032 Low Density Polyethylene
- Lubrizol ESTAGRIP® ST70A Polyether-Type Thermoplastic Polyurethane
- 3A Composites Core Materials BALTEK® SB.50 Structural End-Grain Balsa
- Ametek P410L P/M Stainless Steel, Sintered from 6.6 g/cc Green Density
Copyright © lookpolymers.com All Rights Reserved