POLYMER SEARCH

Murtfeldt Murylon® A Nylon 66

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Impact Grade
Manufacturer	Murtfeldt Kunststoffe GmbH & Co
Trade Name	Murylon®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Murtfeldt Murylon® A Nylon 66.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

This material combines the excellent properties of the Murylon® range with additional high tensile and compressive strength, increased wear resistance, and a lower level of moisture absorption than Murylon® B.Special Properties:• High wear resistance• Improved tensile and compressive strength• High temperature resistance• Extremely good fatigue strength• Low cold flow characteristics• Approved for use in the food industry (EU and FDAInformation provided by Murtfeldt Kunststoffe GmbH & Co. KG.

Physical Properties	Metric	English	Comments
Density	1.14 g/cc	0.0412 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	2.4 % @Temperature 23.0 °C	2.4 % @Temperature 73.4 °F	50% RH
Water Absorption at Saturation	8.0 % @Temperature 23.0 °C	8.0 % @Temperature 73.4 °F

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	88	88	dry; ISO 2039-2
Hardness, Shore D	81	81	DIN 53505
Ball Indentation Hardness	160 MPa	23200 psi	dry; ISO 2039-1
Tensile Strength, Yield	55.0 MPa	7980 psi	50% RH; ISO 527-1
	90.0 MPa	13100 psi	dry; ISO 527-1
Elongation at Break	50 %	50 %	dry; ISO 527-1
	>= 100 %	>= 100 %	50% RH; ISO 527-1
Modulus of Elasticity	1.70 GPa	247 ksi	50% RH
	3.55 GPa	515 ksi	dry
Compressive Yield Strength	32.0 MPa @Strain 1.00 %	4640 psi @Strain 1.00 %	dry; ISO 604
	62.0 MPa @Strain 2.00 %	8990 psi @Strain 2.00 %	dry; ISO 604
	100 MPa @Strain 5.00 %	14500 psi @Strain 5.00 %	dry; ISO 604
Charpy Impact Unnotched	NB	NB	dry; ISO 179-1/1eU
	NB	NB	ISO 179
Charpy Impact, Notched	0.450 J/cm²	2.14 ft-lb/in²	dry; ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.30	0.30
Sand Slurry	0.10	0.10	µm/km

Thermal Properties	Metric	English	Comments
CTE, linear	80.0 µm/m-°C @Temperature 23.0 - 60.0 °C	44.4 µin/in-°F @Temperature 73.4 - 140 °F
	95.0 µm/m-°C @Temperature 23.0 - 100 °C	52.8 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F
Melting Point	260 °C	500 °F	ISO 11357-1
Maximum Service Temperature, Air	80.0 °C @Time 7.20e+7 sec	176 °F @Time 20000 hour
	95.0 °C @Time 1.80e+7 sec	203 °F @Time 5000 hour
	180 °C @Time <=86400 sec	356 °F @Time <=24.0 hour
Minimum Service Temperature, Air	-30.0 °C	-22.0 °F
Glass Transition Temp, Tg	60.0 °C	140 °F	ISO 11357-1
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Electrical Resistivity	>= 1.00e+12 ohm-cm	>= 1.00e+12 ohm-cm	50% RH; IEC 60093
	>= 1.00e+14 ohm-cm	>= 1.00e+14 ohm-cm	dry; IEC 60093
Surface Resistance	>= 1.00e+12 ohm	>= 1.00e+12 ohm	50% RH; IEC 60093
	>= 1.00e+13 ohm	>= 1.00e+13 ohm	dry; IEC 60093
Dielectric Constant	3.3 @Frequency 1.00e+6 Hz	3.3 @Frequency 1.00e+6 Hz	dry; IEC 60250
	3.8 @Frequency 100 Hz	3.8 @Frequency 100 Hz	dry; IEC 60250
	3.8 @Frequency 1.00e+6 Hz	3.8 @Frequency 1.00e+6 Hz	50% RH; IEC 60250
	7.4 @Frequency 100 Hz	7.4 @Frequency 100 Hz	50% RH; IEC 60250
Dielectric Strength	18.0 kV/mm	457 kV/in	50% RH; IEC 60243-1
	27.0 kV/mm	686 kV/in	dry; IEC 60243-1
Dielectric Loss Index	0.013 @Frequency 100 Hz	0.013 @Frequency 100 Hz	dry; IEC 60250
	0.020 @Frequency 1.00e+6 Hz	0.020 @Frequency 1.00e+6 Hz	dry; IEC 60250
	0.060 @Frequency 1.00e+6 Hz	0.060 @Frequency 1.00e+6 Hz	50% RH; IEC 60250
	0.13 @Frequency 100 Hz	0.13 @Frequency 100 Hz	50% RH; IEC 60250

Compliance Properties	Metric	English	Comments
European Food 1935/2004	Yes	Yes
FDA	Yes	Yes

Descriptive Properties	Value	Comments
Color	Natural/Black

Users viewing this material also viewed the following: