- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyolefin
- Multibase Multi-Flex® D 3104 TPO Thermoplastic Polyolefin Elastomer
Multibase Multi-Flex® D 3104 TPO Thermoplastic Polyolefin Elastomer
| Category | Polymer , Thermoplastic , Elastomer, TPE , Polyolefin |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® D 3104 TPO Thermoplastic Polyolefin Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Features: Chemical Resistance, Good PaintableOzone Resistant Thermal Stability, GoodDensity, LowTear Strength, Good Forms:PelletsProcessing Method:Injection Molding Uses: Automotive ApplicationsInformation provided by Multibase
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.902 g/cc | 0.902 g/cc | ASTM 792 |
| Linear Mold Shrinkage | 0.012 cm/cm | 0.012 in/in | ASTM D955 |
| Melt Flow | 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
3.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 39 | 39 | 10 seconds; ASTM D2240 |
| Tensile Strength, Yield | 15.9 MPa | 2300 psi | Elastic; ASTM D412 |
| Elongation at Break | 540 % | 540 % | Elastic; ASTM D412 |
| Flexural Modulus | 0.193 GPa | 28.0 ksi | ASTM D790 |
| Tear Strength | 84.1 kN/m | 480 pli | ASTM D624 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 177 - 199 °C | 350 - 390 °F | |
| Middle Barrel Temperature | 199 - 221 °C | 390 - 430 °F | |
| Front Barrel Temperature | 221 - 232 °C | 430 - 450 °F | |
| Nozzle Temperature | 6.11 - 232 °C | 43.0 - 450 °F | |
| Melt Temperature | 232 °C | 450 °F | |
| Mold Temperature | 37.8 °C | 100 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Clamp Tonnage | 2-4 tons/in2 | |
| Screw L/D Ratio | 20:1 |
Users viewing this material also viewed the following:
- Nye Lubricants NC-140 Grease
- Polykemi AB POLYfill PP CIP15015 UV Polypropylene, Mineral Reinforced
- SABIC Innovative Plastics Cycoloy® RCY6013 PC+ABS (Asia Pacific)
- 3M Dyneon™ PFA 6503 A EPC Perfluoroalkoxy Fluorothermoplastic (discontinued **)
- Techmer ES Electrafil® J-1200/CF/40 NAT ABS
- Total HL 428 HDPE film resin
- ConocoPhillips ANDEROL® FGC 40 Compressor Fluid, Synthetic Food Grade ISO 100
- Arkema Group Pebax® MH 1657 Polyether Block Amide (PEBA)
- Bhansali Engineering Abstron IM-11B ABS Injection Molding Grade
- Resinlab® UR3005 Clear Two Part Urethane Elastomer
Copyright © lookpolymers.com All Rights Reserved