Multibase Multi-FlexÂ® D 3104-8 TPO Thermoplastic Polyolefin Elastomer

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyolefin
Manufacturer	Multibase
Trade Name	Multi-Flex®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Multibase Multi-FlexÂ® D 3104-8 TPO Thermoplastic Polyolefin Elastomer.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Features: Chemical Resistance, Good PaintableOzone Resistant Thermal Stability, GoodDensity, LowTear Strength, GoodScratch Resistant Forms:PelletsProcessing Method:Injection Molding Uses: Automotive ApplicationsInformation provided by Multibase

Physical Properties	Metric	English	Comments
Specific Gravity	0.942 g/cc	0.942 g/cc	ASTM 792
Linear Mold Shrinkage	0.012 cm/cm	0.012 in/in	ASTM D955
Melt Flow	5.0 g/10 min @Load 2.16 kg, Temperature 230 Â°C	5.0 g/10 min @Load 4.76 lb, Temperature 446 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	40	40	10 seconds; ASTM D2240
Tensile Strength, Yield	12.1 MPa	1760 psi	Elastic; ASTM D412
Elongation at Break	600 %	600 %	Elastic; ASTM D412
Flexural Modulus	0.207 GPa	30.0 ksi	ASTM D790
Tear Strength	77.1 kN/m	440 pli	ASTM D624

Processing Properties	Metric	English
Rear Barrel Temperature	177 - 199 Â°C	350 - 390 Â°F
Middle Barrel Temperature	199 - 221 Â°C	390 - 430 Â°F
Front Barrel Temperature	221 - 232 Â°C	430 - 450 Â°F
Nozzle Temperature	6.11 - 232 Â°C	43.0 - 450 Â°F
Melt Temperature	232 Â°C	450 Â°F
Mold Temperature	37.8 Â°C	100 Â°F

Descriptive Properties	Value	Comments
Clamp Tonnage	2-4 tons/in²
Screw L/D Ratio	20:1

Users viewing this material also viewed the following: