Lucite International XL Sanitary Ware Acrylic Sheet

Category	Polymer , Thermoplastic , Acrylic (PMMA)
Manufacturer	Lucite International
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Lucite International XL Sanitary Ware Acrylic Sheet.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

LuciteÂ® XL continuous-cast cross-linked acrylic sheet is specially formulated for deep-draw thermoforming. It is used primarily for production of spas.Benefits: Smooth surface; Infinite colors and effects; Hardwearing; Exceptional quality; 100% recyclable; Enhanced functionalityInformation provided by Lucite International

Physical Properties	Metric	English	Comments
Density	1.19 g/cc	0.0430 lb/inÂ³	ASTM D792
Water Absorption	0.25 %	0.25 %	ASTM D570
Linear Mold Shrinkage	<= 0.025 cm/cm	<= 0.025 in/in

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	95	95	ASTM D785 Procedure A
Tensile Strength	62.0 - 69.0 MPa	8990 - 10000 psi	specimen type 1, 5 mm/mn; ASTM D638
Elongation at Break	4.0 - 5.0 %	4.0 - 5.0 %
Modulus of Elasticity	3.172 GPa	460.1 ksi
Flexural Strength	110.3 MPa	16000 psi	ASTM D790 (Method 1, Procedure A)
Compressive Yield Strength	111 MPa	16100 psi	ASTM D695
Shear Strength	59.6 MPa	8640 psi
Izod Impact, Notched	0.160 J/cm	0.300 ft-lb/in	ASTM D256 method C

Thermal Properties	Metric	English	Comments
CTE, linear	70.0 Âµm/m-Â°C	38.9 Âµin/in-Â°F	ASTM D696
Specific Heat Capacity	1.47 J/g-Â°C	0.351 BTU/lb-Â°F	ASTM C351
Thermal Conductivity	0.209 W/m-K	1.45 BTU-in/hr-ftÂ²-Â°F	ASTM C177-76
Maximum Service Temperature, Air	80.0 Â°C	176 Â°F
Deflection Temperature at 1.8 MPa (264 psi)	86.0 Â°C	187 Â°F	ASTM D648
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	ASTM D257
Surface Resistance	<= 1.00e+14 ohm @Temperature 28.0 Â°C	<= 1.00e+14 ohm @Temperature 82.4 Â°F	75% RH; ASTM D257
Dielectric Constant	3.0 @# of Cycles 1000	3.0 @# of Cycles 1000	ASTM D150
	3.0 @# of Cycles 1.00e+6	3.0 @# of Cycles 1.00e+6	ASTM D150
	4.0 @# of Cycles 60.0	4.0 @# of Cycles 60.0	ASTM D150
Dielectric Strength	20.0 kV/mm	508 kV/in	short time test; ASTM D149

Processing Properties	Metric	English	Comments
Processing Temperature	170 - 190 Â°C	338 - 374 Â°F	thermoforming temperature

Users viewing this material also viewed the following: