Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

LNP VALOX® SMV5845 PBT + PET Alloy, 16% Carbon Fiber Reinforcement  (discontinued **)

Category Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT) , Polyethylene Terephthalate (PET)
Manufacturer
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF LNP VALOX® SMV5845 PBT + PET Alloy, 16% Carbon Fiber Reinforcement  (discontinued **).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
ESD Applications. Will be VC1600.Features: Good Chemical Resistance, High Flow, Flame RetardantForms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names instituted after the SABIC purchase.
Mechanical Properties Metric English Comments
Tensile Strength, Yield 123 MPa
17800 psi
Type I, 5 mm/min; ASTM D638
Flexural Strength 188 MPa
27300 psi
102 mm Span, 3 mm/min; ASTM D790
Flexural Modulus 10.6 GPa
1540 ksi
(102 mm Span) 3mm/min; ASTM D790
Izod Impact, Notched 0.427 J/cm
0.800 ft-lb/in
ASTM D256
Thermal Properties Metric English Comments
Deflection Temperature at 1.8 MPa (264 psi) 202 °C

@Thickness 6.35 mm
396 °F

@Thickness 0.250 in
Unannealed; ASTM D648
Electrical Properties Metric English Comments
Volume Resistivity 35 ohm-cm
35 ohm-cm
ASTM D257
Surface Resistance 30000 ohm
30000 ohm
ASTM D257
Static Decay <= 0.010 sec
<= 0.010 sec
5000V to <50V; FTMS101B
Processing Properties Metric English Comments
Rear Barrel Temperature 238 - 254 °C
460 - 489 °F
Middle Barrel Temperature 243 - 260 °C
469 - 500 °F
Front Barrel Temperature 249 - 266 °C
480 - 511 °F
Nozzle Temperature 243 - 260 °C
469 - 500 °F
Melt Temperature 249 - 266 °C
480 - 511 °F
Mold Temperature 65.6 - 87.8 °C
150 - 190 °F
Drying Temperature 121 °C
250 °F
Dry Time 3 - 12 hour
3 - 12 hour
Moisture Content 0.020 %
0.020 %
Suggested
Back Pressure 0.345 - 0.689 MPa
50.0 - 99.9 psi
Clamp Pressure 41.0 - 83.0 MPa
5950 - 12000 psi
Shot Size 40 - 80 %
40 - 80 %
Suggested
Vent Depth 0.00250 - 0.00380 cm
0.000984 - 0.00150 in
Screw Speed 50 - 80 rpm
50 - 80 rpm
Copyright © lookpolymers.com All Rights Reserved