LNP Lubricomp® PDX-J-91198 Polyethersulfone, Proprietary Filler (discontinued **)

Category	Polymer , Thermoplastic , Polyethersulfone (PES)
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LNP Lubricomp® PDX-J-91198 Polyethersulfone, Proprietary Filler (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Features: LubricatedForms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names instituted after the SABIC purchase.

Physical Properties	Metric	English	Comments
Specific Gravity	1.50 g/cc	1.50 g/cc	Method A; ASTM D792
Density	1.50 g/cc	0.0542 lb/in³	ISO 1183
Water Absorption	0.40 %	0.40 %	at 24 hrs; ASTM D570
Linear Mold Shrinkage	0.0020 cm/cm	0.0020 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0040 cm/cm	0.0040 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	117 MPa	17000 psi	ASTM D638
Elongation at Break	1.9 %	1.9 %	ASTM D638
Tensile Modulus	10.1 GPa	1460 ksi	ASTM D638
Flexural Strength	165 MPa	23900 psi	ASTM D790
Flexural Modulus	8.83 GPa	1280 ksi	ASTM D790
Izod Impact, Notched	0.427 J/cm @Thickness 3.18 mm	0.800 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Unnotched	3.31 J/cm @Thickness 3.18 mm	6.20 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Notched (ISO)	7.40 kJ/m²	3.52 ft-lb/in²	ISO 180
Izod Impact, Unnotched (ISO)	26.9 kJ/m²	12.8 ft-lb/in²	ISO 180
Falling Dart Impact	4.20 J	3.10 ft-lb	ASTM D3763
Impact Test	2.36 J	1.74 ft-lb	Multi-Axial Instrumented Impact Energy; ISO 6603-2
Coefficient of Friction, Dynamic	0.43	0.43	vs. Steel - @ 40 psi, 50 ft/min, tested in accordance with LNP WI-0687; ASTM D1894
Coefficient of Friction, Static	0.34	0.34	vs. Steel @ 40 psi, tested in accordance with LNP WI-0687; ASTM D1894
K (wear) Factor	8.06 x 10^-8 mm³/N-M	4.00 x 10^-10 in³-min/ft-lb-hr	40psi, 50ft/min; tested in accordance with LNP WI-0687

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	211 °C	412 °F	Unannealed; ASTM D648

Processing Properties	Metric	English	Comments
Melt Temperature	354 - 371 °C	669 - 700 °F
Mold Temperature	135 - 149 °C	275 - 300 °F
Drying Temperature	121 - 149 °C	250 - 300 °F
Dry Time	4 hour	4 hour
Moisture Content	0.050 %	0.050 %	Suggested
Back Pressure	0.345 - 0.689 MPa	50.0 - 99.9 psi

Users viewing this material also viewed the following: