Bulk Molding Compounds BMC T60 Grey Wear Resistant Molding Compound

Category	Polymer , Thermoset , Polyester, TS , Polyester (Thermoset) - Rigid
Manufacturer	BMC - Bulk Molding Compounds Inc.
Trade Name	BMC
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Bulk Molding Compounds BMC T60 Grey Wear Resistant Molding Compound.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

BMC T60 Grey is a wear resistant molding compound specifically formulated for applications that require excellent abrasion resistance. Due to its low specific gravity it has substantial cost per cubic inch savings. BMC T60 Grey can be injection, transfer and compression molded. It is UL listed and is typically used in power distribution equipment, switching components/relays, constant use switch applications and circuit protection breakers.Information provided by Bulk Molding Compounds, Inc.

Physical Properties	Metric	English	Comments
Density	1.51 - 1.71 g/cc	0.0546 - 0.0618 lb/in³	Molded
Linear Mold Shrinkage	0.0020 - 0.0030 cm/cm	0.0020 - 0.0030 in/in

Mechanical Properties	Metric	English
Hardness, Barcol	5.0 - 10	5.0 - 10
Tensile Strength	31.0 - 44.8 MPa	4500 - 6500 psi
Flexural Strength	53.8 - 81.4 MPa	7800 - 11800 psi
Flexural Modulus	3.65 - 5.03 GPa	530 - 730 ksi
Compressive Strength	84.8 - 112 MPa	12300 - 16300 psi
Izod Impact, Notched	1.23 - 2.30 J/cm	2.30 - 4.30 ft-lb/in

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	>= 260 °C	>= 500 °F
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Dielectric Strength	13.2 - 15.2 kV/mm	335 - 385 kV/in	short time
Arc Resistance	>= 185 sec	>= 185 sec
Comparative Tracking Index	>= 500 V	>= 500 V

Processing Properties	Metric	English	Comments
Processing Temperature	138 - 166 °C	280 - 330 °F

Users viewing this material also viewed the following: