POLYMER SEARCH

LG Chemical LupoxÂ® SG3250M PBT+PET+MF25%

Category	Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT) , PBT + PET, Mineral Filled , Polyethylene Terephthalate (PET)
Manufacturer	LG Chemical
Trade Name	Lupox®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LG Chemical LupoxÂ® SG3250M PBT+PET+MF25%.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: Injection Molding, PBT+PET+MF25%, Good SurfaceApplication: Automotive (Head Lamp Bezel)CAS No. 24968-12-5, 25038-59-9 and 14807-96-6Information provided by LG Chemical

Physical Properties	Metric	English	Comments
Specific Gravity	1.54 g/cc	1.54 g/cc	ASTM D792
Maximum Moisture Content	0.020	0.020	Injection Molding
Linear Mold Shrinkage, Flow	0.0050 - 0.012 cm/cm @Thickness 3.20 mm	0.0050 - 0.012 in/in @Thickness 0.126 in	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	44.1 MPa @Thickness 3.20 mm	6400 psi @Thickness 0.126 in	50mm/min; ASTM D638
Elongation at Break	3.5 % @Thickness 3.20 mm	3.5 % @Thickness 0.126 in	5mm/min; ASTM D638
Flexural Yield Strength	83.4 MPa @Thickness 3.20 mm	12100 psi @Thickness 0.126 in	1.3mm/min; ASTM D790
Flexural Modulus	4.31 GPa @Thickness 3.20 mm	626 ksi @Thickness 0.126 in	1.3mm/min; ASTM D790
Izod Impact, Notched	0.294 J/cm @Thickness 3.20 mm, Temperature 23.0 Â°C	0.551 ft-lb/in @Thickness 0.126 in, Temperature 73.4 Â°F	ASTM D256

Thermal Properties	Metric	English	Comments
Melting Point	225 Â°C	437 Â°F	@ Break; ASTM D3418
Deflection Temperature at 0.46 MPa (66 psi)	200 Â°C @Thickness 6.40 mm	392 Â°F @Thickness 0.252 in	Unannealed; ASTM D648

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	245 - 255 Â°C	473 - 491 Â°F	Injection Molding
Middle Barrel Temperature	250 - 260 Â°C	482 - 500 Â°F	Injection Molding
Front Barrel Temperature	255 - 265 Â°C	491 - 509 Â°F	Injection Molding
Nozzle Temperature	255 - 265 Â°C	491 - 509 Â°F	Injection Molding
Melt Temperature	255 - 265 Â°C	491 - 509 Â°F	Injection Molding
Mold Temperature	80.0 - 100 Â°C	176 - 212 Â°F	Injection Molding
Drying Temperature	120 Â°C	248 Â°F	Injection Molding
Dry Time	4.00 - 5.00 hour	4.00 - 5.00 hour	Injection Molding

Users viewing this material also viewed the following: