POLYMER SEARCH

Kolon KOPELÂ® KP3372 General Purpose TPE Resin

Category	Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber
Manufacturer	Kolon
Trade Name	KOPEL®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Kolon KOPELÂ® KP3372 General Purpose TPE Resin.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

KOPELÂ® is a thermoplastic polyester elastomer which is a new engineering rubber having combined properties of conventional rubber and thermoplastic. Its flexibility and elastic recovery are very similar to rubber, but its processability is much superior to rubber. While its flexibility and elastic recovery are similar to rubber, its mechanical properties-heat resistance, weather resistance and UV stability-are far greater than the performance of rubber.Excellent flexibility and creep resistance, good mechanical properties and heat stability, good chemical resistanceInformation provided by US distributor, API-Kolon.

Physical Properties	Metric	English	Comments
Density	1.27 g/cc	0.0459 lb/inÂ³	DIN 53479; ASTM D792
Water Absorption	0.30 %	0.30 %	DIN 53475; ASTM D570
Linear Mold Shrinkage	0.016 - 0.019 cm/cm	0.016 - 0.019 in/in	ASTM D955
Melt Flow	17 g/10 min @Temperature 230 Â°C	17 g/10 min @Temperature 446 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	72	72	DIN 53505; ASTM D2240
Tensile Strength, Ultimate	39.2 MPa	5690 psi	DIN 53455; ASTM D638
Elongation at Break	400 %	400 %	DIN 53455; ASTM D638
Izod Impact, Notched	0.539 J/cm	1.01 ft-lb/in	Low Temp
	2.55 J/cm	4.78 ft-lb/in	DIN 53453; ASTM D256
Taber Abrasion, mg/1000 Cycles	10	10	CS-17 WHEEL; ASTM D1044

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	148 Â°C	298 Â°F	DIN 53461; ASTM D648
Brittleness Temperature	<= -65.0 Â°C	<= -85.0 Â°F	Solenoid Brittle Point; ASTM D746
Flammability, UL94	HB	HB

Users viewing this material also viewed the following: