- HOME
- POLYMER SEARCH
- Thermoplastic
- Acrylic (PMMA)
- Kleerdex Elson® 405 AS DC Plate, PMMA/Acrylic, Clear Transparent (discontinued **)
Kleerdex Elson® 405 AS DC Plate, PMMA/Acrylic, Clear Transparent (discontinued **)
| Category | Polymer , Thermoplastic , Acrylic (PMMA) |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kleerdex Elson® 405 AS DC Plate, PMMA/Acrylic, Clear Transparent
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Kleerdex Company. Kleerdex Company became KYDEX, LLC in 2009.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792; DIN 53479 |
| Water Absorption | 0.30 % | 0.30 % | ASTM D570; DIN 53495 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 74.5 MPa | 10800 psi | ASTM D638 |
| Elongation at Break | 5.0 % | 5.0 % | ASTM D638; DIN 53455 |
| Modulus of Elasticity | 3.30 GPa | 479 ksi | ASTM D638; DIN 53452 |
| Flexural Yield Strength | 117.7 MPa | 17070 psi | ASTM D790; DIN 53455 |
| Flexural Modulus | 2.90 GPa | 421 ksi | ASTM D790; DIN 53457 |
| Izod Impact, Notched | 0.203 J/cm | 0.380 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched (ISO) | 2.00 kJ/m² | 0.952 ft-lb/in² | JIS K7110 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 70.0 µm/m-°C @Temperature 20.0 °C |
38.9 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Specific Heat Capacity | 1.47 J/g-°C | 0.351 BTU/lb-°F | ASTM C177 |
| Thermal Conductivity | 0.210 W/m-K | 1.46 BTU-in/hr-ft²-°F | ASTM C177 |
| Deflection Temperature at 1.8 MPa (264 psi) | 90.0 °C | 194 °F | ASTM D648 |
| Flammability, UL94 | HB | HB |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Refractive Index | 1.49 | 1.49 | ASTM D542 |
| Haze | 1.36 % | 1.36 % | ASTM D1003 |
| Transmission, Visible | 86 % | 86 % | Transmittance; ASTM D1003 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | 1.00e+6 - 1.00e+8 ohm | 1.00e+6 - 1.00e+8 ohm | ASTM D257; DIN 53482 |
| Static Decay | 0.0010 sec | 0.0010 sec | Electrostatic Discharge; MIL D-81715B |
| Dielectric Constant | 3.5 | 3.5 | ASTM D150; DIN 53483 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Coating Layer Bond Strength | 100/100 | JIS D0202 |
| Distinctness of image | 98.1 | |
| Pencil Hardness | H (4H-Cast) | JIS K5400 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics LNP COLORCOMP G1000 PSU (Europe-Africa-Middle East)
- Solvay Specialty Polymers Udel® GF-130 Polysulfone (PSU), Glass Fiber
- Teknor Apex Monprene® MP-1353A Thermoplastic Elastomer
- TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with Sundex 790
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 60 PHR Non-Black, Precipitated Calcium Carbonate
- Dow UNIVAL™ DMDC-6400 NT 7 High Density Polyethylene Resin (HDPE)
- Aaron Industries AAROLENE® ARPE LD 300-1 Low Density Polyethylene Compounded Resin
- Polykemi AB POLYfill PPH TS8038 Polypropylene Homopolymer, Mineral Reinforced
Copyright © lookpolymers.com All Rights Reserved