POLYMER SEARCH

Kingfa FRHIPS-722 Flame Retardant Polystyrene

Category	Polymer , Thermoplastic , Polystyrene (PS) , Polystyrene, Flame Retardant
Manufacturer	Kingfa Sci. & Tech. Co.
Trade Name
Port	Shanghai port,China
Trade Terms	EXW, FOB, CFR, CIF
Payment Terms	L/C, T/T, PayPal
Download PDF	Kingfa FRHIPS-722 Flame Retardant Polystyrene.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Features:UL 94 V-0 @ 3.2mmHalogen free flame retardantExcellent heat stabilityExcellent electrical propertiesApplications:Injection moldingGas moldingTV and audio housingElectrical appliance housingInformation Provided by Kingfa Sci. & Tech. Co., Ltd.

Physical Properties	Metric	English	Comments
Specific Gravity	1.07 g/cc <br>@Temperature 23.0 Â°C	1.07 g/cc <br>@Temperature 73.4 Â°F	ASTM D792
Linear Mold Shrinkage	0.0040 - 0.0060 cm/cm <br>@Temperature 23.0 Â°C	0.0040 - 0.0060 in/in <br>@Temperature 73.4 Â°F	ASTM D955
Melt Flow	10 g/10 min <br>@Load 5.00 kg,<br> Temperature 200 Â°C	10 g/10 min <br>@Load 11.0 lb,<br> Temperature 392 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	30.0 MPa	4350 psi	50mm/min; ASTM D638
Elongation at Break	40 %	40 %	50mm/min; ASTM D638
Flexural Strength	45.0 MPa	6530 psi	2mm/min; ASTM D790
Flexural Modulus	2.35 GPa	341 ksi	2mm/min; ASTM D790
Izod Impact, Notched	0.980 J/cm <br>@Thickness 3.20 mm,<br> Temperature 23.0 Â°C	1.84 ft-lb/in <br>@Thickness 0.126 in,<br> Temperature 73.4 Â°F	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	76.0 Â°C <br>@Thickness 6.40 mm	169 Â°F <br>@Thickness 0.252 in	ASTM D648
Flammability, UL94	V-2 <br>@Thickness 1.00 mm	V-2 <br>@Thickness 0.0394 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	ASTM D257

Processing Properties	Metric	English	Comments
Processing Temperature	<= 250 Â°C	<= 482 Â°F
Rear Barrel Temperature	192 - 215 Â°C	378 - 419 Â°F	Start Point: 200Â°C
Middle Barrel Temperature	215 - 240 Â°C	419 - 464 Â°F	Start Point: 225Â°C
Front Barrel Temperature	225 - 245 Â°C	437 - 473 Â°F	Start Point: 235Â°C
Melt Temperature	220 - 245 Â°C	428 - 473 Â°F	Start Point: 230Â°C
Mold Temperature	30.0 - 60.0 Â°C	86.0 - 140 Â°F	Start Point: 50Â°C
Drying Temperature	70.0 Â°C <br>@Time 14400 sec	158 Â°F <br>@Time 4.00 hour	Pre-dry
Back Pressure	5.00 - 15.0 MPa	725 - 2180 psi

Descriptive Properties	Value	Comments
Injection Speed	Slow to Moderate

Users viewing this material also viewed the following: