POLYMER SEARCH

Ineos T50-400 HDPE

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE
Manufacturer	Ineos Olefins & Polymers USA
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ineos T50-400 HDPE.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

T50-400 is a high density polyethylene copolymer having a narrow molecular weight distribution. It is intended for injection molding applications where a good balance of processability and end-use properties are required. Typical applications include pails and material handling devices. This material meets the Food and Drug Administration requirements of 21CFR 177.1520.

Physical Properties	Metric	English	Comments
Density	0.953 g/cc	0.0344 lb/inÂ³	ASTM D4883
Environmental Stress Crack Resistance	8.0 hour	8.0 hour	Condition B, 10%, F50; ASTM D1693
Melt Flow	4.0 g/10 min @Load 2.16 kg, Temperature 190 Â°C	4.0 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	65	65	ASTM D2240
Tensile Strength, Yield	26.9 MPa	3900 psi	2 in/min; ASTM D638
Elongation at Break	800 %	800 %	2 in/min; ASTM D638
Flexural Modulus	1.28 GPa	185 ksi	Tangent-Method; ASTM D790
Izod Impact, Notched	0.854 J/cm	1.60 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	81.1 Â°C	178 Â°F	ASTM D648
Vicat Softening Point	128 Â°C	262 Â°F	ASTM D1525
Brittleness Temperature	<= -75.0 Â°C	<= -103 Â°F	ASTM D746

Descriptive Properties	Value	Comments
Process	Injection Molding

Users viewing this material also viewed the following: