Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Ineos ABS Lustran® ABS M406

Category Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Impact Grade, Molded
Manufacturer Ineos ABS
Trade Name Lustran®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Ineos ABS Lustran® ABS M406.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Lustran® ABS M406 has very high impact strength and increased chemical and dynamic resistance. It is used for the production of molded plastic articles.
Physical Properties Metric English Comments
Linear Mold Shrinkage, Flow 0.0060 - 0.0090 cm/cm
0.0060 - 0.0090 in/in
Test Condition: 150x105x3; acc. ISO 2577
Linear Mold Shrinkage, Transverse 0.0060 - 0.0090 cm/cm
0.0060 - 0.0090 in/in
Test Condition: 150x105x3; acc. ISO 2577
Melt Flow 10 g/10 min

@Load 10.0 kg,
Temperature 220 °C
 10 g/10 min

@Load 22.0 lb,
Temperature 428 °F
 ISO 1133
Mechanical Properties Metric English Comments
Ball Indentation Hardness 74.0 MPa
10700 psi
ISO 2039-1
Tensile Strength at Break 29.0 MPa
4210 psi
50 mm/min; ISO 527-1,-2
Tensile Strength, Yield 39.0 MPa
5660 psi
50 mm/min; ISO 527-1,-2
Elongation at Break >= 15 %
>= 15 %
50 mm/min; acc. ISO 527-1,-2
Elongation at Yield 2.6 %
2.6 %
50 mm/min; ISO 527-1,-2
Tensile Modulus 1.80 GPa
261 ksi
1 mm/min; ISO 527-1,-2
Flexural Strength 55.0 MPa
7980 psi
2 mm/min; ISO 178
Flexural Modulus 1.80 GPa
261 ksi
2 mm/min; ISO 178
Izod Impact, Notched (ISO) 18.0 kJ/m²

@Temperature -30.0 °C
 8.57 ft-lb/in²

@Temperature -22.0 °F
 ISO 180-1A
29.0 kJ/m²

@Temperature 23.0 °C
 13.8 ft-lb/in²

@Temperature 73.4 °F
 ISO 180-1A
Thermal Properties Metric English Comments
CTE, linear 110 µm/m-°C

@Temperature 23.0 - 55.0 °C
 61.1 µin/in-°F

@Temperature 73.4 - 131 °F
 ISO 11359-1,-2; Parallel to Flow
CTE, linear, Transverse to Flow 110 µm/m-°C

@Temperature 23.0 - 55.0 °C
 61.1 µin/in-°F

@Temperature 73.4 - 131 °F
 ISO 11359-1,-2
Deflection Temperature at 0.46 MPa (66 psi) 95.0 °C
203 °F
ISO 75-1,-2
Deflection Temperature at 1.8 MPa (264 psi) 91.0 °C
196 °F
ISO 75-1,-2
Vicat Softening Point 92.0 °C

@Load 5.10 kg
 198 °F

@Load 11.2 lb
 50°C/hour; ISO 306
Flammability, UL94 HB

@Thickness 1.60 mm
 HB

@Thickness 0.0630 in
Glow Wire Test 650 °C
1200 °F
GWFI; IEC 60695-2-12
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+17 ohm-cm
1.00e+17 ohm-cm
IEC 60093
Surface Resistance 1.00e+15 ohm
1.00e+15 ohm
IEC 60093
Dielectric Constant 2.8

@Frequency 1.00e+6 Hz
 2.8

@Frequency 1.00e+6 Hz
 IEC 60250
2.9

@Frequency 100 Hz
 2.9

@Frequency 100 Hz
 IEC 60250
Dielectric Strength 33.0 kV/mm

@Thickness 1.00 mm
 838 kV/in

@Thickness 0.0394 in
 IEC 60243-1
Dissipation Factor 0.0055

@Frequency 100 Hz
 0.0055

@Frequency 100 Hz
 IEC 60250
0.0090

@Frequency 1.00e+6 Hz
 0.0090

@Frequency 1.00e+6 Hz
 IEC 60250
Comparative Tracking Index 600 V
600 V
Solution A, Rating; IEC 60112
Processing Properties Metric English Comments
Melt Temperature 240 °C
464 °F
Injection Molding; ISO 294
Mold Temperature 70.0 °C
158 °F
Injection Molding; ISO 294
Injection Velocity 240 mm/sec
9.45 in/sec
Injection Molding; ISO 294
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved