- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LDPE
- Low Density Polyethylene (LDPE), Molded
- Huntsman PE2065 Injection Molding Polyethylene (discontinued **)
Huntsman PE2065 Injection Molding Polyethylene (discontinued **)
| Category | Polymer , Thermoplastic , Polyethylene (PE) , LDPE , Low Density Polyethylene (LDPE), Molded |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Huntsman PE2065 Injection Molding Polyethylene
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Homopolymer and FDA compliant.Features: General purpose injection molding resin with good flow characteristicsApplications: Injection molding: lids.FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (c)2.2 under condition of use B through H described in Table 2 of 21 CFR 176.170Information provided by Huntsman Corporation
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.923 g/cc | 0.0333 lb/in³ | ASTM D1505 |
| Melt Flow | 35 g/10 min | 35 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 55 | 55 | ASTM D2240 |
| Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638 |
| Tensile Strength, Yield | 13.5 MPa | 1960 psi | ASTM D638 |
| Elongation at Break | 200 % | 200 % | ASTM D638 |
| Modulus of Elasticity | 0.345 GPa | 50.0 ksi | Secant; ASTM D638 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 98.0 °C | 208 °F | ASTM D1525 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved