- HOME
- POLYMER SEARCH
- Thermoplastic
- ABS Polymer
- Acrylonitrile Butadiene Styrene (ABS), Extruded
- Gichem GILAC D160/MT Acrylonitrile Butadiene Styrene (discontinued **)
Gichem GILAC D160/MT Acrylonitrile Butadiene Styrene (discontinued **)
| Category | Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Extruded |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Gichem GILAC D160/MT Acrylonitrile Butadiene Styrene
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
ABS with good resilience, good thermal properties. Medium-High Injection speed.Information provided by GICHEM Gruppo Industriale Chimico
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.05 g/cc | 0.0379 lb/in³ | ASTM D792 |
| Water Absorption | 0.30 % | 0.30 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0040 - 0.0060 cm/cm | 0.0040 - 0.0060 in/in | ASTM D955 |
| Melt Flow | 8.0 g/10 min | 8.0 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 42.0 MPa | 6090 psi | ASTM D638 |
| Elongation at Yield | 25 % | 25 % | ASTM D638 |
| Flexural Modulus | 2.30 GPa | 334 ksi | ASTM D790 |
| Izod Impact, Notched | 1.60 J/cm | 3.00 ft-lb/in | ASTM D256 |
| 1.00 J/cm @Temperature 0.000 °C |
1.87 ft-lb/in @Temperature 32.0 °F |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 102 °C | 216 °F | ASTM D648 |
| Vicat Softening Point | 102 °C | 216 °F | ASTM D1525/A |
| Flammability, UL94 | HB @Thickness 3.20 mm |
HB @Thickness 0.126 in |
|
| Flammability Test | 75 | 75 | [°C] Bilia; IEC 331 |
| Oxygen Index | 19 % | 19 % | ASTM D2863 |
| Glow Wire Test | 650 °C | 1200 °F | IEC 695-2-1 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Middle Barrel Temperature | 220 °C | 428 °F | |
| Mold Temperature | 50.0 - 60.0 °C | 122 - 140 °F | |
| Drying Temperature | 80.0 °C | 176 °F | 2 hours |
Users viewing this material also viewed the following:
- Advanced Elastomer Systems Santoprene® 281-73 Thermoplastic Rubber (discontinued **)
- LG Chemical LUCEL HI-515 High Impact POM, Unreinforced
- Shandong Dongyue Polymer DF-205 PTFE Fine Powder
- Borealis CG9620 High Density Polyethylene
- Fainplast Compounds Hax™ HFX 509 Crosslinkable HFFR Cable Compound
- BASF Ultraform N 2640 Z4 UNC Q600 POM
- Abatron 8602-2 A/B Carbon-Filled Electrically Conductive Epoxy Compound
- Pyrotek E-1 Board Structural Insulating Board
- Mitsui Fybrel® UL 410 Polyolefin Synthetic Pulp, Wet Processes (discontinued **)
Copyright © lookpolymers.com All Rights Reserved