Entec Hylox® 9015 PBT, 15% Glass Reinforced

Category	Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT) , Polybutylene Terephthalate (PBT), 20% Glass Fiber Filled
Manufacturer	Entec Engineered Resins
Trade Name	Hylox®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Entec Hylox® 9015 PBT, 15% Glass Reinforced.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Entec's proprietary products include a full range of compounds in the Nylon 6/6, Nylon 6, ABS, PBT, Polycarbonate, PC/ABS, PC/ASA, PC/PBT, and PPO/PPE resin families.Information provided by Entec.

Physical Properties	Metric	English	Comments
Density	1.41 g/cc	0.0509 lb/in³	ASTM D792
Water Absorption	0.070 %	0.070 %	24 hrs; ASTM D570
Linear Mold Shrinkage	0.0040 - 0.0060 cm/cm	0.0040 - 0.0060 in/in	0.125 in; ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	90	90	ASTM D785
Tensile Strength at Break	93.1 MPa	13500 psi	ASTM D638
Elongation at Break	4.0 %	4.0 %	ASTM D638
Flexural Strength	148 MPa	21400 psi	ASTM D790
Flexural Modulus	4.83 GPa	700 ksi	ASTM D790
Izod Impact, Notched	0.587 J/cm	1.10 ft-lb/in	73°F; ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	50.4 µm/m-°C @Temperature 20.0 °C	28.0 µin/in-°F @Temperature 68.0 °F	ASTM D696
Deflection Temperature at 0.46 MPa (66 psi)	210 °C	410 °F	Unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	200 °C	392 °F	Unannealed; ASTM D648
Flammability, UL94	HB	HB	0.0280 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	ASTM D257
Dielectric Constant	3.6 @Frequency 100 Hz	3.6 @Frequency 100 Hz	ASTM D150
Dielectric Strength	26.0 kV/mm	660 kV/in	ASTM D149

Processing Properties	Metric	English
Rear Barrel Temperature	232 - 243 °C	450 - 470 °F
Middle Barrel Temperature	238 - 249 °C	460 - 480 °F
Front Barrel Temperature	243 - 254 °C	470 - 490 °F
Nozzle Temperature	243 - 254 °C	470 - 490 °F
Melt Temperature	249 - 260 °C	480 - 500 °F
Mold Temperature	82.2 - 121 °C	180 - 250 °F
Drying Temperature	121 °C	250 °F
Dry Time	<= 12 hour	<= 12 hour
Moisture Content	<= 0.020 %	<= 0.020 %
Injection Pressure	6.89 - 11.7 MPa	1000 - 1700 psi
Back Pressure	0.138 - 0.414 MPa	20.0 - 60.0 psi
Shot Size	40 - 80 %	40 - 80 %
Screw Speed	40 - 80 rpm	40 - 80 rpm

Descriptive Properties	Value	Comments
Holding Pressure	500 to 900 psi
Injection Rate	Moderate-Fast

Users viewing this material also viewed the following: