- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Ensinger Tecamid® ST Nylon (PA)
Ensinger Tecamid® ST Nylon (PA)
| Category | Polymer , Thermoplastic , Nylon |
| Manufacturer | Ensinger |
| Trade Name | Tecamid® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Ensinger Tecamid® ST Nylon (PA).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Super Tough nylon, increased impact resistance and toughness over nylon 6/6.Information provided by Ensinger, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.08 g/cc | 0.0390 lb/in³ | ASTM D792 |
| Water Absorption | 1.2 % | 1.2 % | at 24 hours; ASTM D570 |
| Water Absorption at Saturation | 6.7 % | 6.7 % | ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 112 | 112 | ASTM D785 |
| Tensile Strength, Yield | 49.6 MPa | 7200 psi | ASTM D638 |
| Elongation at Break | 60 % | 60 % | ASTM D638 |
| Flexural Strength | 67.6 MPa | 9800 psi | ASTM D790 |
| Flexural Modulus | 1.69 GPa | 245 ksi | ASTM D790 |
| Izod Impact, Notched | 9.08 J/cm | 17.0 ft-lb/in | ASTM D256 |
| Coefficient of Friction, Dynamic | 0.28 | 0.28 | 40 psi, 50 fpm; ASTM D3702 |
| K (wear) Factor | 403 x 10-8 mm³/N-M | 200 x 10-10 in³-min/ft-lb-hr | 40 psi, 50 fpm; ASTM D3702 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 121 µm/m-°C @Temperature 20.0 °C |
67.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Melting Point | 263 °C | 505 °F | ASTM D2133 |
| Deflection Temperature at 0.46 MPa (66 psi) | 216 °C | 421 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 71.1 °C | 160 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 0.810 mm |
HB @Thickness 0.0319 in |
Users viewing this material also viewed the following:
- Niche Polymer PA66GI14BK Nylon 66, 14% Glass Fiber Filled, Impact Modified
- Polykemi AB SCANAMID 66 A12^ F35 NH9 Nylon 66, Glass Fiber Reinforced, Flame Retardant, Halogen Free
- Overview of materials for Polyphenylene Ether, Heat Resistant
- Lubriplate Brick Grease Specialty Lubricant and Grease
- Multibase Multi-Flex® A 8030 TPE Thermoplastic Elastomer
- Seals Eastern 7345 Highly Saturated Nitrile Rubber
- Styrolution Polystyrol 168 N GR 2 PS
- Chase Plastics CP Pryme® NN230GL (COND, 50% RH) Nylon 66, 33% Glass Fiber Reinforced, Internally Lubricated
- Fainplast Compounds HAX HF 019/HT6 Halogen Free PVC
- Fainplast Compounds MGS 79 Medical Flexible PVC, Injection Molding
Copyright © lookpolymers.com All Rights Reserved