- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, 30% Glass Fiber Filled
- EPICHEM Epinyl PA 66 GF 30 Polyamide 66, 30% Glass
EPICHEM Epinyl PA 66 GF 30 Polyamide 66, 30% Glass
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled |
| Manufacturer | EPICHEM srl |
| Trade Name | Epinyl |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | EPICHEM Epinyl PA 66 GF 30 Polyamide 66, 30% Glass.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Characteristics: 30% glass fibre filled
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.36 g/cc | 0.0491 lb/in³ | ASTM D792, ISO 1183 |
| Water Absorption | 6.0 % @Temperature 23.0 °C |
6.0 % @Temperature 73.4 °F |
24h; ASTM D570, ISO 62 |
| Linear Mold Shrinkage | 0.0020 - 0.011 cm/cm | 0.0020 - 0.011 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell L | 110 | 110 | ASTM D785, ISO 2039/2 |
| Tensile Strength, Yield | 170 MPa | 24700 psi | ASTM D638, ISO R527 |
| Elongation at Break | 3.0 % | 3.0 % | ASTM D638, ISO R527 |
| Flexural Strength | 235 MPa | 34100 psi | ASTM D790, ISO 178 |
| Flexural Modulus | 8.90 GPa | 1290 ksi | ASTM D790, ISO 178 |
| Izod Impact, Notched | 0.700 J/cm @Thickness 3.20 mm, Temperature 23.0 °C |
1.31 ft-lb/in @Thickness 0.126 in, Temperature 73.4 °F |
ASTM D256, ISO 180/4a |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 100 °C | 212 °F | 20000 h; VDE 0304/P2-1, IEC 216 |
| 110 °C | 230 °F | 5000 h; VDE 0304/P2-1, IEC 216 | |
| 200 °C | 392 °F | few hours; VDE 0304/P2-1, IEC 216 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 248 °C | 478 °F | ASTM D648, ISO 75 |
| Vicat Softening Point | 250 °C @Load 5.00 kg |
482 °F @Load 11.0 lb |
120°C/min; ASTM D1525/B, ISO 306/B |
| 254 °C @Load 0.999 kg |
489 °F @Load 2.20 lb |
120°C/min; ASTM D1525/A, ISO 306/A | |
| Flammability, UL94 | HB @Thickness 1.60 mm |
HB @Thickness 0.0630 in |
|
| HB @Thickness 3.20 mm |
HB @Thickness 0.126 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistance | 1.00e+13 ohm | 1.00e+13 ohm | ASTM D257, IEC 93 |
| Dielectric Constant | 3.5 @Frequency 1000 Hz |
3.5 @Frequency 1000 Hz |
ASTM D150, IEC 250 |
| Dielectric Strength | 90.0 kV/mm | 2290 kV/in | ASTM D149, IEC 243 |
| Dissipation Factor | 0.020 @Frequency 1000 Hz |
0.020 @Frequency 1000 Hz |
ASTM D150, IEC 250 |
| Comparative Tracking Index | 475 V | 475 V | VDE 0303-P1, IEC 112 |
Users viewing this material also viewed the following:
- MetalTek MTEK D Cast UNS N04019 Nickel-Copper Alloy
- Ter Hell Plastic Terez® PA 6 7450 T GK 30 Polyamide 6, 30% Glass Fiber
- A. Schulman POLYPUR™ FPU 1550 Thermoplastic Polyurethane Compound
- Cossa Polimeri ESTAPROP H 0360 T8 Polypropylene, 30% Mineral Filled
- Dow 118.01 Developmental Performance Polypropylene Polymer
- Dow Corning 556 Cosmetic Grade Fluid
- BASF Ultramid® KR 4355 G10 BK 23215 50% Glass Filled PA6/6T (Dry)
- 3M Scotchlite™ 680CR-75 Removable Reflective Graphic Film with Comply™ Adhesive
- Fibre Glast 1110 CC Vinyl Ester Resin (Casting Properties) (discontinued **)
Copyright © lookpolymers.com All Rights Reserved