POLYMER SEARCH

EMS-Grivory Grivory® GVX-65 H black 9915 PA*-GF65

Category	Polymer , Thermoplastic , Nylon
Manufacturer	EMS-Grivory (EMS-CHEMIE)
Trade Name	Grivory®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	EMS-Grivory Grivory® GVX-65 H black 9915 PA*-GF65.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Product description: Grivory GVX-65H black 9915 is a 65% glass fiber reinforced engineering thermoplastic material based on a combination of semicrystalline polyamide with partially aromatic copolyamide. Grivory GVX-65H black 9915 has an optimized flowability and is suitable for injection molding technical parts, exhibiting exceptional characteristics even after moisture absorption: high stiffness and strengthhigh dimensional stability, very low warpagegood chemical resistancevery good surface finish Grivory GVX-65H black 9915 is the economical alternative to die-cast alloys.Information provided by EMS Grivory

Physical Properties	Metric	English	Comments
Density	1.77 g/cc	0.0639 lb/in³	ISO 1183
Water Absorption	3.2 %	3.2 %	ISO 62
Moisture Absorption	1.10 %	1.10 %	ISO 62
Linear Mold Shrinkage, Flow	0.0010 cm/cm	0.0010 in/in	ISO 294-4, 2577
Linear Mold Shrinkage, Transverse	0.0020 cm/cm	0.0020 in/in	ISO 294-4, 2577

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	330 MPa	47900 psi	conditioned; ISO 2039-1
	345 MPa	50000 psi	dry; ISO 2039-1
Tensile Strength at Break	280 MPa	40600 psi	conditioned; ISO 527-1/-2
	300 MPa	43500 psi	dry; ISO 527-1/-2
Elongation at Break	1.9 %	1.9 %	dry; ISO 527-1/-2
	1.9 %	1.9 %	conditioned; ISO 527-1/-2
Tensile Modulus	25.0 GPa	3630 ksi	conditioned; ISO 527-1/-2
	25.5 GPa	3700 ksi	dry; ISO 527-1/-2
Charpy Impact Unnotched	7.00 J/cm²	33.3 ft-lb/in²	conditioned; ISO 179/1eU
	7.50 J/cm²	35.7 ft-lb/in²	dry; ISO 179/1eU
	7.00 J/cm² @Temperature 30.0 °C	33.3 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
	7.00 J/cm² @Temperature 30.0 °C	33.3 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU
Charpy Impact, Notched	1.50 J/cm²	7.14 ft-lb/in²	dry; ISO 179/1eA
	1.50 J/cm²	7.14 ft-lb/in²	conditioned; ISO 179/1eA
	1.50 J/cm² @Temperature 30.0 °C	7.14 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
	1.50 J/cm² @Temperature 30.0 °C	7.14 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	15.0 µm/m-°C	8.33 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	50.0 µm/m-°C	27.8 µin/in-°F	ISO 11359-1/-2
Melting Point	260 °C	500 °F	10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air	100 - 120 °C	212 - 248 °F	long term; EMS
	220 °C	428 °F	short term; EMS
Deflection Temperature at 1.8 MPa (264 psi)	250 °C	482 °F	ISO 75-1/-2
Deflection Temperature at 8.0 MPa	215 °C	419 °F	ISO 75-1/-2
Flammability, UL94	HB	HB	IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	dry; IEC 60093
	1.00e+12 ohm-cm	1.00e+12 ohm-cm	conditioned; IEC 60093
Surface Resistance	1.00e+12 ohm	1.00e+12 ohm	IEC 60093
Dielectric Strength	33.0 kV/mm	838 kV/in	dry; IEC 60243-1
	33.0 kV/mm	838 kV/in	conditioned; IEC 60243-1
Comparative Tracking Index	600 V	600 V	conditioned; IEC 60112

Descriptive Properties	Value	Comments
Automotive	Air intake sytems
	Automotive electr. and electronics, lighting
	Cooling and climate control
	Exterior
	Interior
	Powertrain and Chassis
Electricals & Electronics	Connectors
	Electrical appliances
	Electrical equipment
	Energy distribution
	Mobile phones and other portable devices
Form	Granules
Industry & Consumer goods	Housewares
	Hydraulics & Pneumatics
	Mechanical Engineering
	Power transmission
	Sanitary, water and gas supply
	Sports & Leisure
	Tools & Accessories
Processing	Injection Molding
Product Attributes	Improved flowability and demoulding
	Partially aromatic Polyamide

Users viewing this material also viewed the following: