POLYMER SEARCH

EMS-Grivory Grivory® GCL-3H anthracite PA*-CF30

Category	Polymer , Thermoplastic , Nylon
Manufacturer	EMS-Grivory (EMS-CHEMIE)
Trade Name	Grivory®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	EMS-Grivory Grivory® GCL-3H anthracite PA*-CF30.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Product description: Grivory GCL-3H anthracite is based on a combination of a heat stabilized semi-crystalline Polyamide with a partially aromatic Polyamide. The product is reinforced by 30% long carbon fibers. Grivory GCL-3H anthracite is characterized by the following key-properties: very high stiffness and strength even after conditioning and over a wide temperature rangeexcellent notched impact resistance also at low temperatureslow creephigh heat distortion temperatureslow moisture absorptionvery good dimensional stability and little warpagevery little coefficient of thermal expansionvery low density Grivory The product has been designed for injection molding of technical parts especially in the area of light weight metal and composite replacement. Grivory GCL-3H anthracite is used in the following market segments: sports & leisureautomotivemechanical engineering The carbon fibers are aligned in parallel and are just as long as the pellets (usually 10 mm).Information provided by EMS Grivory

Physical Properties	Metric	English	Comments
Density	1.28 g/cc	0.0462 lb/in³	ISO 1183
Water Absorption	4.7 %	4.7 %	ISO 62
Moisture Absorption	1.50 %	1.50 %	ISO 62
Linear Mold Shrinkage, Transverse	0.0010 cm/cm	0.0010 in/in	ISO 294-4, 2577

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	285 MPa	41300 psi	conditioned; ISO 2039-1
	320 MPa	46400 psi	dry; ISO 2039-1
Tensile Strength at Break	215 MPa	31200 psi	dry; ISO 527-1/-2
	270 MPa	39200 psi	conditioned; ISO 527-1/-2
Elongation at Break	1.6 %	1.6 %	dry; ISO 527-1/-2
	1.7 %	1.7 %	conditioned; ISO 527-1/-2
Tensile Modulus	21.5 GPa	3120 ksi	conditioned; ISO 527-1/-2
	22.5 GPa	3260 ksi	dry; ISO 527-1/-2
Charpy Impact Unnotched	5.50 J/cm²	26.2 ft-lb/in²	dry; ISO 179/1eU
	6.50 J/cm²	30.9 ft-lb/in²	conditioned; ISO 179/1eU
	5.50 J/cm² @Temperature 30.0 °C	26.2 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
	6.50 J/cm² @Temperature 30.0 °C	30.9 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU
Charpy Impact, Notched	1.60 J/cm²	7.61 ft-lb/in²	dry; ISO 179/1eA
	1.60 J/cm²	7.61 ft-lb/in²	conditioned; ISO 179/1eA
	2.00 J/cm² @Temperature 30.0 °C	9.52 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
	2.00 J/cm² @Temperature 30.0 °C	9.52 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	10.0 µm/m-°C	5.56 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	25.0 µm/m-°C	13.9 µin/in-°F	ISO 11359-1/-2
Melting Point	260 °C	500 °F	10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air	100 - 120 °C	212 - 248 °F	long term; EMS
	220 °C	428 °F	short term; EMS
Deflection Temperature at 1.8 MPa (264 psi)	255 °C	491 °F	ISO 75-1/-2
Deflection Temperature at 8.0 MPa	240 °C	464 °F	ISO 75-1/-2
Flammability, UL94	HB	HB	IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	3000 ohm-cm	3000 ohm-cm	dry; IEC 60093
	3000 ohm-cm	3000 ohm-cm	conditioned; IEC 60093
Surface Resistance	50 ohm	50 ohm	IEC 60093

Descriptive Properties	Value	Comments
Automotive	Automotive electr. and electronics, lighting
	Cooling and climate control
	Exterior
	Fuel systems
	Interior
	Powertrain and Chassis
Electricals & Electronics	Connectors
	Electrical appliances
	Electrical equipment
	Energy distribution
Form	Granules
Industry & Consumer goods	Housewares
	Hydraulics & Pneumatics
	Mechanical Engineering
	Power transmission
	Sports & Leisure
	Tools & Accessories
Processing	Injection Molding
Product Attributes	Long Fiber Reinforced
Special Characteristics	Anti-static
	Improved heat resistance

Users viewing this material also viewed the following: