DuPont Performance Polymers Sorona® MT3401 NC010 Polytrimethylene Terephthalate (PTT) (Unverified Data**)

Category	Polymer , Renewable/Recycled Polymer , Thermoplastic , Polyester, TP , Polytrimethylene Terephthalate (PTT)
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Sorona® MT3401 NC010 Polytrimethylene Terephthalate (PTT) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Sorona® MT3401 NC010 is a medium toughened polytrimethylene terephthalate resin containing 29% renewably sourced ingredients by weight. It was initially coded SE38001.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	1.23 g/cc	0.0444 lb/in³	ISO 1183
Water Absorption	0.080 % @Temperature 23.0 °C	0.080 % @Temperature 73.4 °F	Immersion 24h; ISO 62, Similar to
	0.11 % @Temperature 23.0 °C	0.11 % @Temperature 73.4 °F	Equilibrium 50%RH; ISO 62, Similar to
	0.34 % @Temperature 23.0 °C	0.34 % @Temperature 73.4 °F	Saturation, immersed; ISO 62, Similar to
Linear Mold Shrinkage, Flow	0.014 cm/cm @Thickness 1.00 mm	0.014 in/in @Thickness 0.0394 in	ISO 294-4
	0.015 cm/cm @Thickness 2.00 mm	0.015 in/in @Thickness 0.0787 in	ISO 294-4
	0.020 cm/cm @Thickness 3.00 mm	0.020 in/in @Thickness 0.118 in	ISO 294-4
Linear Mold Shrinkage, Transverse	0.014 cm/cm @Thickness 1.00 mm	0.014 in/in @Thickness 0.0394 in	ISO 294-4
	0.017 cm/cm @Thickness 2.00 mm	0.017 in/in @Thickness 0.0787 in	ISO 294-4
	0.021 cm/cm @Thickness 3.00 mm	0.021 in/in @Thickness 0.118 in	ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	35.0 MPa @Temperature 23.0 °C	5080 psi @Temperature 73.4 °F	ISO 527
Elongation at Break	15 % @Temperature 23.0 °C	15 % @Temperature 73.4 °F	nominal; ISO 527
	20 % @Temperature 23.0 °C	20 % @Temperature 73.4 °F	50mm/min; ISO 527
Elongation at Yield	5.0 % @Temperature 23.0 °C	5.0 % @Temperature 73.4 °F	ISO 527
Tensile Modulus	1.60 GPa @Temperature 23.0 °C	232 ksi @Temperature 73.4 °F	ISO 527
Flexural Modulus	1.60 GPa @Temperature 23.0 °C	232 ksi @Temperature 73.4 °F	ISO 178
Izod Impact, Notched (ISO)	18.0 kJ/m² @Temperature 23.0 °C	8.57 ft-lb/in² @Temperature 73.4 °F	ISO 180/1A
Charpy Impact, Notched	2.20 J/cm² @Temperature 23.0 °C	10.5 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	500 µm/m-°C @Temperature 23.0 - 55.0 °C	278 µin/in-°F @Temperature 73.4 - 131 °F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	138 µm/m-°C @Temperature 23.0 - 55.0 °C	76.7 µin/in-°F @Temperature 73.4 - 131 °F	ISO 11359-1/-2
Melting Point	229 °C	444 °F	10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	75.0 °C	167 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	53.0 °C	127 °F	ISO 75-1/-2
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	IEC 60695-11-10
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in	IEC 60695-11-10
	HB @Thickness 0.750 mm	HB @Thickness 0.0295 in	IEC 60695-11-10
	HB @Thickness 0.750 mm	HB @Thickness 0.0295 in	UL94
	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	UL94
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in	UL94
Oxygen Index	<= 20 %	<= 20 %	ISO 4589-1/-2
Glow Wire Test	650 °C @Thickness 3.00 mm	1200 °F @Thickness 0.118 in	IEC 60695-2-12
	650 °C @Thickness 1.50 mm	1200 °F @Thickness 0.0591 in	IEC 60695-2-12
	675 °C @Thickness 1.00 mm	1250 °F @Thickness 0.0394 in	IEC 60695-2-12
	675 °C @Thickness 3.00 mm	1250 °F @Thickness 0.118 in	Ignition; IEC 60695-2-13
	675 °C @Thickness 1.50 mm	1250 °F @Thickness 0.0591 in	Ignition; IEC 60695-2-13
	700 °C @Thickness 1.00 mm	1290 °F @Thickness 0.0394 in	Ignition; IEC 60695-2-13

Electrical Properties	Metric	English	Comments
Volume Resistivity	6.00e+16 ohm-cm @Temperature 23.0 °C	6.00e+16 ohm-cm @Temperature 73.4 °F	IEC 60093
Surface Resistance	6.00e+14 ohm @Temperature 23.0 °C	6.00e+14 ohm @Temperature 73.4 °F	IEC 60093
Dielectric Constant	3.4 @Frequency 1.00e+6 Hz, Temperature 23.0 °C	3.4 @Frequency 1.00e+6 Hz, Temperature 73.4 °F	IEC 60250
	3.6 @Frequency 100 Hz, Temperature 23.0 °C	3.6 @Frequency 100 Hz, Temperature 73.4 °F	IEC 60250
	3.6 @Frequency 1000 Hz, Temperature 23.0 °C	3.6 @Frequency 1000 Hz, Temperature 73.4 °F	IEC 60250
Dielectric Strength	23.0 kV/mm @Thickness 2.00 mm, Temperature 90.0 °C	584 kV/in @Thickness 0.0787 in, Temperature 194 °F	IEC 60243-1
	24.0 kV/mm @Thickness 2.00 mm, Temperature 23.0 °C	610 kV/in @Thickness 0.0787 in, Temperature 73.4 °F	IEC 60243-1
	32.0 kV/mm @Thickness 1.00 mm, Temperature 23.0 °C	813 kV/in @Thickness 0.0394 in, Temperature 73.4 °F	IEC 60243-1
	32.0 kV/mm @Thickness 1.00 mm, Temperature 90.0 °C	813 kV/in @Thickness 0.0394 in, Temperature 194 °F	IEC 60243-1
Dissipation Factor	0.0020 @Frequency 100 Hz, Temperature 23.0 °C	0.0020 @Frequency 100 Hz, Temperature 73.4 °F	IEC 60250
	0.0025 @Frequency 1000 Hz, Temperature 23.0 °C	0.0025 @Frequency 1000 Hz, Temperature 73.4 °F	IEC 60250
	0.0205 @Frequency 1.00e+6 Hz, Temperature 23.0 °C	0.0205 @Frequency 1.00e+6 Hz, Temperature 73.4 °F	IEC 60250
Comparative Tracking Index	600 V @Temperature 23.0 °C	600 V @Temperature 73.4 °F	IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	260 °C	500 °F	Optimum
	250 - 270 °C	482 - 518 °F
Mold Temperature	80.0 - 110 °C	176 - 230 °F
	100 °C	212 °F	optimum
Drying Temperature	120 °C	248 °F
Dry Time	4.00 hour	4.00 hour
Moisture Content	<= 0.020 %	<= 0.020 %

Descriptive Properties	Value	Comments
Additive	Impact Modifier
	Lubricant
Appearance	Natural Color
Features	Chemical Resistance, Good
	Dimensional Stability, Good
	Gloss, High
	Moisture Absorption, Low
	Renewable Resource Content
	Strength, Good
	Toughness, Good
Forms	Pellets
Generic	PTT
Material Status	Preliminary Data
Part Marking Code	>PTT-I<	ISO 11469
Polymer Family	Polyester
Polymer Type	PTT
Processing Method	Injection Molding
Product Category	Renewably Sourced Resins
	Toughened Resins
Region Available - Global	Yes
Resin Identification	PTT-I	ISO 1043
RoHS Compliance	Contact Manufacturer
Uses	Automotive Applications
	Consumer Applications
	General Purpose
	Industrial Applications
	Parts, Engineering
	Parts, Machine/Mechanical
	Sporting Goods
	Toys

Users viewing this material also viewed the following: