DuPont Performance Polymers Delrin® 100PE NC010 Acetal (POM) (Unverified Data**)

Category	Polymer , Thermoplastic , Acetal (POM) , Acetal Homopolymer, Unreinforced
Manufacturer	DuPont Performance Polymers
Trade Name	Delrin®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Delrin® 100PE NC010 Acetal (POM) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

High Viscosity Acetal Homopolymer with Very Low Emissions Delrin 100PE NC010 (formerly DE20573) is a high viscosity acetal homopolymer an enhanced version of Delrin 100P with very low VOC emissions. It has the best combination of strength and toughnessInformation provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	1.19 g/cc	0.0430 lb/in³
	1.42 g/cc	0.0513 lb/in³	ISO 1183
Viscosity	134900 cP @Shear Rate 5000 1/s, Temperature 230 °C	134900 cP @Shear Rate 5000 1/s, Temperature 446 °F	ISO 11403-1 -2
	151800 cP @Shear Rate 5000 1/s, Temperature 215 °C	151800 cP @Shear Rate 5000 1/s, Temperature 419 °F	ISO 11403-1 -2
	167300 cP @Shear Rate 5000 1/s, Temperature 200 °C	167300 cP @Shear Rate 5000 1/s, Temperature 392 °F	ISO 11403-1 -2
	697800 cP @Shear Rate 500 1/s, Temperature 230 °C	697800 cP @Shear Rate 500 1/s, Temperature 446 °F	ISO 11403-1 -2
	779300 cP @Shear Rate 500 1/s, Temperature 215 °C	779300 cP @Shear Rate 500 1/s, Temperature 419 °F	ISO 11403-1 -2
	875100 cP @Shear Rate 500 1/s, Temperature 200 °C	875100 cP @Shear Rate 500 1/s, Temperature 392 °F	ISO 11403-1 -2
Linear Mold Shrinkage, Flow	0.022 cm/cm	0.022 in/in	ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.018 cm/cm	0.018 in/in	ISO 294-4 2577
Melt Flow	2.1 g/10 min @Load 2.16 kg, Temperature 190 °C	2.1 g/10 min @Load 4.76 lb, Temperature 374 °F	cm³/10min; ISO 1133
	2.5 g/10 min @Load 2.16 kg, Temperature 190 °C	2.5 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	91	91	ISO 2039-2
Hardness, Rockwell R	121	121	ISO 2039-2
Tensile Strength, Yield	72.0 MPa	10400 psi	ISO 527-1/-2
Elongation at Break	45 %	45 %	Nominal; ISO 527-1/-2
Elongation at Yield	26 %	26 %	ISO 527-1/-2
Tensile Modulus	3.10 GPa	450 ksi	ISO 527-1/-2
Flexural Strength	79.0 MPa @Strain 3.50 %	11500 psi @Strain 3.50 %	ISO 178
Flexural Modulus	2.90 GPa	421 ksi	ISO 178
Charpy Impact Unnotched	NB	NB	ISO 179/1eU
	40.0 J/cm² @Temperature -30.0 °C	190 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
Charpy Impact, Notched	1.50 J/cm²	7.14 ft-lb/in²	ISO 179/1eA
	1.30 J/cm² @Temperature -30.0 °C	6.19 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	110 µm/m-°C	61.1 µin/in-°F	ISO 11359-1/-2
	100 µm/m-°C @Temperature -40.0 - 23.0 °C	55.6 µin/in-°F @Temperature -40.0 - 73.4 °F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	110 µm/m-°C	61.1 µin/in-°F	ISO 11359-1/-2
	100 µm/m-°C @Temperature -40.0 - 23.0 °C	55.6 µin/in-°F @Temperature -40.0 - 73.4 °F	ISO 11359-1/-2
Melting Point	178 °C	352 °F	10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	157 °C	315 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	99.0 °C	210 °F	ISO 75-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+15 ohm-cm	>= 1.00e+15 ohm-cm	IEC 60093
Surface Resistance	3.00e+14 ohm	3.00e+14 ohm	IEC 60093
Dielectric Constant	3.9 @Frequency 1.00e+6 Hz	3.9 @Frequency 1.00e+6 Hz	IEC 60250
	4.0 @Frequency 100 Hz	4.0 @Frequency 100 Hz	IEC 60250
Dielectric Strength	44.0 kV/mm	1120 kV/in	IEC 60243-1
Dissipation Factor	0.00050 @Frequency 100 Hz	0.00050 @Frequency 100 Hz	IEC 60250
	0.0050 @Frequency 1.00e+6 Hz	0.0050 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Descriptive Properties	Value	Comments
Additives	Release agent
Delivery Form	Pellets
Emissions	<2 mg/kg	VDA 275
Part Marking Code	>POM<	ISO 11469
Processing	Injection Moulding
	Other Extrusion
	Profile Extrusion
	Sheet Extrusion
Regional Availability	Asia Pacific
	Europe
	Global
	Near East/Africa
	North America
	South and Central America
Resin Identification	POM	ISO 1043

Users viewing this material also viewed the following: