- HOME
- POLYMER SEARCH
- Adhesive
- Dow Corning SLYGARD® 537 ONE PART DIELECTRIC GEL
Dow Corning SLYGARD® 537 ONE PART DIELECTRIC GEL
| Category | Polymer , Adhesive , Thermoset , Silicone |
| Manufacturer | Dow Corning |
| Trade Name | SLYGARD® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Dow Corning SLYGARD® 537 ONE PART DIELECTRIC GEL.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Dow Corning
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.980 g/cc @Temperature 25.0 °C |
0.980 g/cc @Temperature 77.0 °F |
|
| Viscosity | 390 cP | 390 cP | dynamic |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 150 °C | 302 °F | |
| Minimum Service Temperature, Air | -45.0 °C | -49.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.90e+15 ohm-cm | 1.90e+15 ohm-cm | |
| Dielectric Strength | 22.0 kV/mm | 559 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 60.0 min @Temperature 150 °C |
1.00 hour @Temperature 302 °F |
|
| Shelf Life | 4.00 Month | 4.00 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | clear | |
| Flowable | yes | |
| Gel Hardness (Grams/Penetration) | 200 | |
| Self Leveling | yes | |
| Water Resistant | yes |
Users viewing this material also viewed the following:
- Nylacast PA6C Cast Nylon 6
- Polimeri Europa Eraclene® MP 94 High Density Polyethylene - Injection Molding
- Indium Corp. Indalloy 155 Tin-Lead Solder Alloy
- Greene Tweed CHEMRAZ® SD585 Perfluoroelastomer
- Momentive Performance Materials RTV1473 Black Adhesive Sealant, FIPG
- Materion Beryllium Copper Alloy 25 Wire; 3/4H (TD03) Temper; 1.3-2.0 mm Diameter (UNS C17200)
- Suqian Unitechem Light Stabilizer 201
- ExxonMobil LDPE LD 185GE Low Density Polyethylene Resin (European Grade)
- DuPont Performance Polymers Zytel® 8018HS NC010 Nylon 66 (Unverified Data**)
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, Hardness 60A, Black Sulfur Cure
Copyright © lookpolymers.com All Rights Reserved