- HOME
- POLYMER SEARCH
- Adhesive
- Dow Corning EG-3000 THIXOTROPIC GEL PARTS A&B
Dow Corning EG-3000 THIXOTROPIC GEL PARTS A&B
| Category | Polymer , Adhesive , Thermoset , Silicone |
| Manufacturer | Dow Corning |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Dow Corning EG-3000 THIXOTROPIC GEL PARTS A&B.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Two-part, heat cure, thixotropic gel.Information provided by Dow Corning
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.980 - 1.01 g/cc @Temperature 25.0 °C |
0.980 - 1.01 g/cc @Temperature 77.0 °F |
|
| Viscosity | 2200 cP | 2200 cP | dynamic |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore OO | 50 | 50 | |
| Penetration P(60), 1/10 mm | 91 | 91 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 170 °C | 338 °F | |
| Minimum Service Temperature, Air | -45.0 °C | -49.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 2.70e+14 ohm-cm | 2.70e+14 ohm-cm | |
| Dielectric Constant | 2.7 @Frequency 100000 Hz |
2.7 @Frequency 100000 Hz |
|
| Dielectric Strength | 22.0 kV/mm | 559 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 60.0 min @Temperature 150 °C |
1.00 hour @Temperature 302 °F |
|
| Shelf Life | 12.0 Month | 12.0 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | clear | |
| Flowable | no | |
| Hydrophobic | yes | |
| Self Leveling | yes | |
| Water Resistant | yes | |
| Working Time (min) | 720 |
Users viewing this material also viewed the following:
- Solvay Engineered Polymers SEQUEL® 1718HFLS Engineered Polyolefin (discontinued **)
- Kinlead HSD11 Normal Grade Heat Sealable Film (thickness: 20 µm)
- ITW Plexus Plexusâ„¢ MA300 Methacrylate Adhesive
- Chase Plastics CP Pryme® N110GL (DAM) Nylon 6, 10% Glass Fiber Reinforced, Internally Lubricated
- Polyram PlusTek PA823M6 Nylon 6.6 for Injection Molding, 30% Minerals Reinforced, Impact Modified
- Tipco Tipcolene® X 408 IN - 10% Talc/Mineral Reinforced Polypropylene Copolymer, Very High Impact Strength & Flow
- California Fine Wire Copper Clad 1006 Steel (40% Conductivity)
- 3M Dyneon™ TF 1641 PTFE
Copyright © lookpolymers.com All Rights Reserved