Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced, Flame Retardant |
Manufacturer | DSM Engineering Plastics |
Trade Name | Akulon® |
Port | Ningbo port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | DSM Akulon® K225-KS (Cond.) Flame Retardant (Halogen free), Heat Stabilized Nylon 6 (North America).pdf ![]() |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.17 g/cc | 0.0423 lb/in³ | (DAM); ISO 1183 |
Water Absorption | 9.0 % | 9.0 % | (DAM); Sim. to ISO 62 |
Moisture Absorption at Equilibrium | 2.5 % | 2.5 % | Humidity Absorption (DAM); Sim. to ISO 62 |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 40.0 MPa | 5800 psi | ISO 527-1/-2 |
Elongation at Break | >= 50 % | >= 50 % | ISO 527-1/-2 |
Elongation at Yield | 22 % | 22 % | ISO 527-1/-2 |
Tensile Modulus | 1.40 GPa | 203 ksi | ISO 527-1/-2 |
Charpy Impact, Notched | 0.600 J/cm² @Temperature -30.0 °C |
2.86 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
1.00 J/cm² @Temperature 23.0 °C |
4.76 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 220 °C | 428 °F | 10°C/min (DAM); ISO 11357-1/-3 |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | IEC 60093 |
Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm | IEC 60093 |
Dielectric Constant | 3.6 @Frequency 1e+6 Hz |
3.6 @Frequency 1e+6 Hz |
IEC 60250 |
8.0 @Frequency 100 Hz |
8.0 @Frequency 100 Hz |
IEC 60250 | |
Dielectric Strength | 25.0 kV/mm | 635 kV/in | IEC 60243-1 |
Dissipation Factor | 0.080 @Frequency 1e+6 Hz |
0.080 @Frequency 1e+6 Hz |
IEC 60250 |
0.125 @Frequency 100 Hz |
0.125 @Frequency 100 Hz |
IEC 60250 | |
Comparative Tracking Index | 600 V | 600 V | IEC 60112 |
Descriptive Properties | Value | Comments |
---|---|---|
Flame Retardant | Yes | |
Flame Retarding Agent | Yes | |
Heat stabilized or stable to heat | Yes | |
Injection molding | Yes | |
Release Agent | Yes | |
Without Fillers | Yes |