POLYMER SEARCH

Covestro Bayblend® T65 HI PC/ABS Blend

Category	Polymer , Thermoplastic , ABS Polymer , Polycarbonate/ABS Alloy, Unreinforced , Polycarbonate (PC)
Manufacturer	Covestro
Trade Name	Bayblend®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Covestro Bayblend® T65 HI PC/ABS Blend.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Main characteristics:• High toughness even at low temperatures• High dimensional accuracy and stability• Good paintability• Good flowabilityGrade characteristics:• Improve low temperature impact strength and chemical resistance for automotive parts• Extrusion/extrusion blow molding• Electroplating applicationsAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.

Physical Properties	Metric	English	Comments
Density	1.11 g/cc	0.0401 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	0.20 %	0.20 %	ISO 62, 50% RH
Water Absorption at Saturation	0.70 %	0.70 %	ISO 62
Viscosity	300000 cP @Shear Rate 1000 1/s, Temperature 260 °C	300000 cP @Shear Rate 1000 1/s, Temperature 500 °F	melt viscosity; b.o. ISO 11443-A
Linear Mold Shrinkage, Flow	0.0065 - 0.0085 cm/cm @Thickness 3.00 mm	0.0065 - 0.0085 in/in @Thickness 0.118 in	150x105x3mm; b.o. ISO 2577
Linear Mold Shrinkage, Transverse	0.0065 - 0.0085 cm/cm @Thickness 3.00 mm	0.0065 - 0.0085 in/in @Thickness 0.118 in	150x105x3mm; b.o. ISO 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	46.0 MPa	6670 psi	50 mm/min; ISO 527-1,-2
Tensile Strength, Yield	48.0 MPa	6960 psi	50 mm/min; ISO 527-1,-2
Elongation at Break	>= 50 %	>= 50 %	50 mm/min; b.o. ISO 527-1,-2
Elongation at Yield	4.5 %	4.5 %	50 mm/min; ISO 527-1,-2
Tensile Modulus	2.00 GPa	290 ksi	1 mm/min; ISO 527-1,-2
Izod Impact, Notched (ISO)	38.0 kJ/m² @Temperature -30.0 °C	18.1 ft-lb/in² @Temperature -22.0 °F	ISO 180-A
	48.0 kJ/m² @Temperature 23.0 °C	22.8 ft-lb/in² @Temperature 73.4 °F	ISO 180-A
Izod Impact, Unnotched (ISO)	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	ISO 180-U
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 180-U

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	90.0 µm/m-°C @Temperature 23.0 - 55.0 °C	50.0 µin/in-°F @Temperature 73.4 - 131 °F	ISO 11359-1,-2
CTE, linear, Transverse to Flow	95.0 µm/m-°C @Temperature 23.0 - 55.0 °C	52.8 µin/in-°F @Temperature 73.4 - 131 °F	ISO 11359-1,-2
Deflection Temperature at 0.46 MPa (66 psi)	120 °C	248 °F	ISO 75-1,-2
Deflection Temperature at 1.8 MPa (264 psi)	99.0 °C	210 °F	ISO 75-1,-2
Vicat Softening Point	118 °C @Load 5.10 kg	244 °F @Load 11.2 lb	50°C/h; ISO 306
	120 °C @Load 5.10 kg	248 °F @Load 11.2 lb	120°C/h; ISO 306
Flammability, UL94	HB @Thickness 0.850 mm	HB @Thickness 0.0335 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	IEC 60093
Surface Resistance	1.00e+16 ohm	1.00e+16 ohm	IEC 60093
Dielectric Constant	2.9 @Frequency 1.00e+6 Hz	2.9 @Frequency 1.00e+6 Hz	IEC 60250
	3.0 @Frequency 100 Hz	3.0 @Frequency 100 Hz	IEC 60250
Dielectric Strength	35.0 kV/mm @Thickness 1.00 mm	889 kV/in @Thickness 0.0394 in	IEC 60243-1
Dissipation Factor	0.0025 @Frequency 100 Hz	0.0025 @Frequency 100 Hz	IEC 60250
	0.0085 @Frequency 1.00e+6 Hz	0.0085 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	275 V	275 V	Solution A; IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	260 °C	500 °F	Injection molding; ISO 294
Mold Temperature	80.0 °C	176 °F	Injection molding; ISO 294
Injection Velocity	240 mm/sec	9.45 in/sec	ISO 294

Users viewing this material also viewed the following: