- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Polytetrafluoroethylene (PTFE), Mica Filled
- Quadrant EPP Fluorosint® 207 PTFE, Compression Molded Synthetic Mica-filled PTFE (ASTM Product Data Sheet)
Quadrant EPP Fluorosint® 207 PTFE, Compression Molded Synthetic Mica-filled PTFE (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Mica Filled |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Fluorosint® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Fluorosint® 207 PTFE, Compression Molded Synthetic Mica-filled PTFE (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.30 g/cc | 2.30 g/cc | ASTM D792 |
| Water Absorption | 0.030 % | 0.030 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 0.20 % | 0.20 % | Immersion; ASTM D570(2) |
| Deformation | 1.1 % | 1.1 % | 2000 psi; 122°F (50°C) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 50 | 50 | ASTM D785 |
| Hardness, Shore D | 65 | 65 | ASTM D2240 |
| Tensile Strength | 10.3 MPa | 1500 psi | ASTM D638 |
| Elongation at Break | 50 % | 50 % | ASTM D638 |
| Tensile Modulus | 1.72 GPa | 250 ksi | ASTM D638 |
| Flexural Strength | 13.8 MPa | 2000 psi | ASTM D790 |
| Flexural Modulus | 2.41 GPa | 350 ksi | ASTM D790 |
| Compressive Strength | 26.2 MPa | 3800 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 1.55 GPa | 225 ksi | ASTM D695 |
| Shear Strength | 11.7 MPa | 1700 psi | ASTM D732 |
| Izod Impact, Notched | 0.534 J/cm | 1.00 ft-lb/in | ASTM D256 Type A |
| Coefficient of Friction, Dynamic | 0.10 | 0.10 | Dry vs. Steel; QTM55007 |
| K (wear) Factor | 171 x 10-8 mm³/N-M | 85.0 x 10-10 in³-min/ft-lb-hr | QTM 55010 |
| Limiting Pressure Velocity | 0.280 MPa-m/sec | 8000 psi-ft/min | 4:1 safety factor; QTM 55007 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 103 µm/m-°C @Temperature -40.0 - 149 °C |
57.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Thermal Conductivity | 0.440 W/m-K | 3.05 BTU-in/hr-ft²-°F | |
| Melting Point | 327 °C | 621 °F | Crystalline, Peak; ASTM D3418 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 98.9 °C | 210 °F | ASTM D648 |
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | >= 1.00e+13 ohm | >= 1.00e+13 ohm | EOS/ESD S11.11 |
| Dielectric Constant | 2.65 @Frequency 1e+6 Hz |
2.65 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 7.87 kV/mm | 200 kV/in | Short Term; ASTM D149 |
| Dissipation Factor | 0.0080 @Frequency 1e+6 Hz |
0.0080 @Frequency 1e+6 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | Yes | Yes | |
| NSF | No | No | |
| USDA | Yes | Yes | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Acceptable | Acceptable | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Conductive / Static Dissipative | Yes | Yes | |
| Continuous Sunlight | Acceptable | Acceptable | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Natural | |
| Machinability | 2 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- IBC Advanced Alloys 4% BeCu Beryllium Copper Master Alloy
- Henkel Turco Scale Gon 7 Jet Engine Cleaner
- Styron DL 220 Plastic Pigment
- Solvay MACKADET® 40-K Surfactant
- A. Schulman POLYBATCH™ White L8350 HSF Concentrate Based In High-Flow LLDPE
- Total PPC 3640 Polypropylene, Heterophasic Copolymer
- EMS-Grivory Grivory® HT2VZ-33H PA6T/66-GF33
- Fainplast Compounds FK 90 Flexible PVC, Insulation Lead Free
- Braskem LL118 Blown Film Extrusion Linear Low Density Polyethylene
- ChevronTexaco SAE 30 Transmission and Drive Train TO-4 Oil
Copyright © lookpolymers.com All Rights Reserved