POLYMER SEARCH

Covestro Apec® 1697 High-Heat Polycarbonate

Category	Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, High Heat , Polycarbonate, Molded , Polycarbonate, UV Stabilized
Manufacturer	Covestro
Trade Name	Apec®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Covestro Apec® 1697 High-Heat Polycarbonate.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

This linear, amorphous copolycarbonate is most suitable for applications that must withstand high temperatures and exhibit toughness, impact resistance and high transparency. These properties, along with good dimensional stability, weatherability and flowability, allow Apec® to be utilized as a replacement for glass, metal or standard polycarbonate in high-heat applications.Main characteristics:• High toughness• Heat resistance• Glass-like transparency• High dimensional accuracy and stability• Good metallization• Good flowability• Good electrical properties.Grade characteristics:• UV stabilized• Low viscosity• Easy releaseAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.

Physical Properties	Metric	English	Comments
Density	1.18 g/cc	0.0426 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	0.12 %	0.12 %	ISO 62, 50% RH
Water Absorption at Saturation	0.30 %	0.30 %	ISO 62
Melt Flow	46 g/10 min @Load 2.16 kg, Temperature 330 °C	46 g/10 min @Load 4.76 lb, Temperature 626 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	68.0 MPa	9860 psi	50 mm/min; ISO 527-1,-2
Elongation at Break	>= 50 %	>= 50 %	Nominal, 50 mm/min; ISO 527-1,-2
Elongation at Yield	6.2 %	6.2 %	50 mm/min; ISO 527-1,-2
Tensile Modulus	2.40 GPa	348 ksi	1 mm/min; ISO 527-1,-2
Charpy Impact Unnotched	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	ISO 179-1eU
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179-1eU

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	65.0 µm/m-°C @Temperature 23.0 - 55.0 °C	36.1 µin/in-°F @Temperature 73.4 - 131 °F	ISO 11359-1,-2
CTE, linear, Transverse to Flow	65.0 µm/m-°C @Temperature 23.0 - 55.0 °C	36.1 µin/in-°F @Temperature 73.4 - 131 °F	ISO 11359-1,-2
Maximum Service Temperature, Air	200 °C	392 °F
Deflection Temperature at 0.46 MPa (66 psi)	149 °C	300 °F	ISO 75-1,-2
Deflection Temperature at 1.8 MPa (264 psi)	137 °C	279 °F	ISO 75-1,-2
Vicat Softening Point	157 °C @Load 5.10 kg	315 °F @Load 11.2 lb	120°C/h; ISO 306
Minimum Service Temperature, Air	-30.0 °C	-22.0 °F
UL RTI, Electrical	140 °C	284 °F	UL 746B
UL RTI, Mechanical with Impact	130 °C	266 °F	UL 746B
UL RTI, Mechanical without Impact	140 °C	284 °F	UL 746B
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in

Optical Properties	Metric	English	Comments
Refractive Index	1.578	1.578	Procedure A; ISO 489
Transmission, Visible	89 % @Thickness 1.00 mm	89 % @Thickness 0.0394 in	ISO 13468-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+17 ohm-cm	1.00e+17 ohm-cm	IEC 60093
Surface Resistance	1.00e+16 ohm	1.00e+16 ohm	IEC 60093
Dielectric Constant	2.9 @Frequency 1.00e+6 Hz	2.9 @Frequency 1.00e+6 Hz	IEC 60250
	3.0 @Frequency 100 Hz	3.0 @Frequency 100 Hz	IEC 60250
Dielectric Strength	35.0 kV/mm @Thickness 1.00 mm	889 kV/in @Thickness 0.0394 in	IEC 60243-1
Dissipation Factor	0.0010 @Frequency 100 Hz	0.0010 @Frequency 100 Hz	IEC 60250
	0.0090 @Frequency 1.00e+6 Hz	0.0090 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	125 V	125 V	CTI M; Solution B; IEC 60112
	250 V	250 V	Solution A; IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	330 °C	626 °F	Injection molding; ISO 294
Mold Temperature	100 °C	212 °F	Injection molding; ISO 294
Injection Velocity	200 mm/sec	7.87 in/sec	ISO 294

Descriptive Properties	Value	Comments
Electrolytic Corrosion	A1	IEC 60426

Users viewing this material also viewed the following: