Chevron Phillips Xtel® XE4050BL Polyphenylene Sulfide Alloy

Category	Polymer , Thermoplastic , Polyphenylene Sulfide (PPS)
Manufacturer	Chevron Phillips Chemical Company LP
Trade Name	Xtel®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Chevron Phillips Xtel® XE4050BL Polyphenylene Sulfide Alloy.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Xtel® XE4050BL is a glass fiber and mineral filled PPS based alloy developed to provide high ductility and impact strength along with good thermal stability.Information provided by Chevron PhillipsMeasured on 102mm x 102mm x 3.2 mm plaques, edge gated.

Physical Properties	Metric	English	Comments
Density	1.70 g/cc	0.0614 lb/in³	ISO 1183A
Water Absorption	0.030 %	0.030 %	ASTM D-570
Linear Mold Shrinkage, Flow	0.0020 cm/cm	0.0020 in/in
Linear Mold Shrinkage, Transverse	0.0040 cm/cm	0.0040 in/in

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	130 MPa	18900 psi	ISO 527
Elongation at Yield	1.7 %	1.7 %	ISO 527
Flexural Strength	190 MPa	27600 psi	ISO 178
Flexural Modulus	11.0 GPa	1600 ksi	ISO 178
Compressive Strength	195 MPa	28300 psi	ISO 604
Izod Impact, Notched (ISO)	7.00 kJ/m²	3.33 ft-lb/in²	ISO 180A
Izod Impact, Unnotched (ISO)	35.0 kJ/m²	16.7 ft-lb/in²	ISO 180A

Thermal Properties	Metric	English	Comments
CTE, linear	10.0 µm/m-°C @Temperature 100 - 200 °C	5.56 µin/in-°F @Temperature 212 - 392 °F	Axial; ISO 11359-2
	20.0 µm/m-°C @Temperature -50.0 - 50.0 °C	11.1 µin/in-°F @Temperature -58.0 - 122 °F	Axial; ISO 11359-2
CTE, linear, Transverse to Flow	50.0 µm/m-°C @Temperature -50.0 - 50.0 °C	27.8 µin/in-°F @Temperature -58.0 - 122 °F	ISO 11359-2
	100 µm/m-°C @Temperature 100 - 200 °C	55.6 µin/in-°F @Temperature 212 - 392 °F	ISO 11359-2
Deflection Temperature at 1.8 MPa (264 psi)	255 °C	491 °F	ISO 75
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	ASTM D-257
Dielectric Constant	4.0 @Frequency 1e+6 Hz	4.0 @Frequency 1e+6 Hz	ASTM D-150
	4.1 @Frequency 1000 Hz	4.1 @Frequency 1000 Hz	ASTM D-150
Dielectric Strength	20.0 kV/mm	508 kV/in	ASTM D-149
Dissipation Factor	0.0030 @Frequency 1000 Hz	0.0030 @Frequency 1000 Hz	ASTM D-150
	0.0090 @Frequency 1e+6 Hz	0.0090 @Frequency 1e+6 Hz	ASTM D-150
Arc Resistance	120 sec	120 sec	ASTM D-495
Comparative Tracking Index	150 V	150 V	UL 746A

Processing Properties	Metric	English	Comments
Melt Temperature	315 - 345 °C	599 - 653 °F
Mold Temperature	135 °C	275 °F

Users viewing this material also viewed the following: