- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, Heat Stabilized
- Chase Plastics CP Pryme® N300HSL (DAM) Nylon 6 (Utility Grade), Heat Stabilized, Internally Lubricated
Chase Plastics CP Pryme® N300HSL (DAM) Nylon 6 (Utility Grade), Heat Stabilized, Internally Lubricated
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Heat Stabilized |
| Manufacturer | Chase Plastics |
| Trade Name | CP Pryme® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Chase Plastics CP Pryme® N300HSL (DAM) Nylon 6 (Utility Grade), Heat Stabilized, Internally Lubricated.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Chase Plastics.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.13 g/cc | 1.13 g/cc | ASTM D792 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 66.9 MPa | 9700 psi | ASTM D638 |
| Elongation at Break | 25 % | 25 % | ASTM D638 |
| Flexural Strength | 96.5 MPa | 14000 psi | ASTM D790 |
| Flexural Modulus | 2.76 GPa | 400 ksi | ASTM D790 |
| Izod Impact, Notched | 0.374 J/cm | 0.700 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 71.1 °C | 160 °F | ASTM D648 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Lexan® HFD1232 PC Copolymer
- Flint Hills P9H9Z-018 Polypropylene
- Special Metals INCOLOY® alloy 832 Stainless Steel
- Teknor Apex Monprene® MP-3017 Thermoplastic Elastomer
- Master Bond EP21TDC-4ND Two component, highly flexibilized epoxy for bonding, sealing and coating
- Toyobo VYLOPET® EMC407 Non-Reinforced
- Dow VORANOL™ CP 450 Polyol
- Henkel SynSpand 9899 Expanding Syntactic Film
Copyright © lookpolymers.com All Rights Reserved