POLYMER SEARCH

CENTROPLAST CENTRO HPM Polysulfone

Category	Polymer , Thermoplastic , Polysulfone (PSU)
Manufacturer	CENTROPLAST Engineering Plastics GMBH
Trade Name	CENTRO
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	CENTROPLAST CENTRO HPM Polysulfone.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

This plastic has good hydrolysis, chemical and radiation resistance, and can operate at high temperatures. It is used in food processing industry, pumps and valves, and medical equipment.Information provided by CENTROPLAST Engineering Plastics GMBH

Physical Properties	Metric	English	Comments
Density	1.24 g/cc	0.0448 lb/in³	ISO 1183
Moisture Absorption at Equilibrium	0.40 %	0.40 %	in normal climate 23°C/50%RH; ISO 62
Water Absorption at Saturation	0.85 %	0.85 %	in water at 23°C; ISO 62

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	91 @Thickness 10.0 mm	91 @Thickness 0.394 in	ISO 2039-2
Ball Indentation Hardness	155 MPa	22500 psi	value at 30 sec.; ISO 2039-1
Tensile Strength, Yield	80.0 MPa	11600 psi	v = 50 mm/min; ISO 527-2
Elongation at Break	10 %	10 %	ISO 527-2
Tensile Modulus	2.70 GPa	392 ksi	ISO 527-2
Charpy Impact Unnotched	NB	NB	ISO 179/1eU
Charpy Impact, Notched	0.400 J/cm²	1.90 ft-lb/in²	ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear	60.0 µm/m-°C @Temperature 20.0 °C	33.3 µin/in-°F @Temperature 68.0 °F	ISO 11359
Thermal Conductivity	0.260 W/m-K	1.80 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air	150 °C	302 °F	Long Term
	180 °C	356 °F	Short term
Deflection Temperature at 1.8 MPa (264 psi)	170 °C	338 °F	ISO 75-2
Flammability, UL94	HB @Thickness 3.00 mm	HB @Thickness 0.118 in
	HB @Thickness 6.00 mm	HB @Thickness 0.236 in

Electrical Properties	Metric	English	Comments
Electrical Resistivity	1.00e+14 ohm-cm	1.00e+14 ohm-cm	IEC 60093
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Dielectric Constant	3.0 @Frequency 100 Hz	3.0 @Frequency 100 Hz	IEC 60250
	3.0 @Frequency 1e+6 Hz	3.0 @Frequency 1e+6 Hz	IEC 60250
Dielectric Strength	30.0 kV/mm	762 kV/in	in transformer oil; IEC 60243-1
Dissipation Factor	0.0010 @Frequency 100 Hz	0.0010 @Frequency 100 Hz	IEC 60250
	0.0030 @Frequency 1e+6 Hz	0.0030 @Frequency 1e+6 Hz	IEC 60250
Comparative Tracking Index	150 V	150 V	IEC 60112

Users viewing this material also viewed the following: