- HOME
- POLYMER SEARCH
- Thermoplastic
- Acetal (POM)
- Acetal Copolymer, Unreinforced
- Barlog Plastics KEBAFORM C 901 CB POM Copolymer unreinforced, electr. conductive
Barlog Plastics KEBAFORM C 901 CB POM Copolymer unreinforced, electr. conductive
| Category | Polymer , Thermoplastic , Acetal (POM) , Acetal Copolymer, Unreinforced |
| Manufacturer | Barlog Plastics |
| Trade Name | KEBAFORM |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Barlog Plastics KEBAFORM C 901 CB POM Copolymer unreinforced, electr. conductive.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
POMInformation provided by BARLOG plastics GmbH.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.39 g/cc | 0.0502 lb/in³ | ISO 1183 |
| Melt Flow | 7.0 g/10 min @Load 2.16 kg, Temperature 190 °C |
7.0 g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 55.0 MPa | 7980 psi | ISO 527-1 |
| Elongation at Break | 5.0 % | 5.0 % | ISO 527-1 |
| Tensile Modulus | 2.70 GPa | 392 ksi | ISO 527-1 |
| Charpy Impact Unnotched | NB | NB | ISO 179-1eU |
| Charpy Impact, Notched | 0.450 J/cm² | 2.14 ft-lb/in² | ISO 179-1eA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 166 °C | 331 °F | 10°C/min; ISO 11357-1/-3 |
| Deflection Temperature at 1.8 MPa (264 psi) | 110 °C | 230 °F | ISO 75-1/-2 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1e+05 | 1e+05 | IEC 60093 |
| Surface Resistance | 2000 ohm | 2000 ohm | IEC 60093 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Resin Type | POM |
Users viewing this material also viewed the following:
- PlastiComp Complet® LCF50-PA66 50% Long Carbon Fiber
- A. Schulman POLYBLAK™ 4479-01 Black Color Concentrate, 50% Carbon Black Based In LLDPE
- Wellman Wellamid® MR410 42H-N 40% Mineral Reinforced Nylon 6, Heat Stabilized
- Total Lumicene® mPE M5510 EP Metallocene Polyethylene, Blown Film
- Trelleborg R350 Natural Rubber Polyisoprene
- A. Schulman SCHULAMID® 6 GF50H 50% Glass Fiber Reinforced Nylon 6
- Eurostar Starglas FF001 HDPE, Glass Fiber Filled
- Arlon 0.015" (0.381 mm) Flexible Heater Silicone with Fiberglass Substrate (51941C015)
- ACC EP MAP-Z 10 EPI Engineered Polymers Aliphatic Polymer
Copyright © lookpolymers.com All Rights Reserved