- HOME
- POLYMER SEARCH
- Electronic/Magnetic Alloy
- California Fine Wire Nickel Alloy 120 Nickel Iron Resistance Wire
California Fine Wire Nickel Alloy 120 Nickel Iron Resistance Wire
| Category | Metal , Electronic/Magnetic Alloy , Nonferrous Metal , Nickel Alloy |
| Manufacturer | California Fine Wire |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | California Fine Wire Nickel Alloy 120 Nickel Iron Resistance Wire.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
All values may vary dependent on specific design and usageCapabilities: WireRibbonSquareInsulatedPlatedInformation provided by California Fine Wire.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.44 g/cc | 0.305 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 483 MPa | 70000 psi | Annealed |
| 1030 MPa | 150000 psi | Hard |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 15.0 µm/m-°C @Temperature 20.0 °C |
8.33 µin/in-°F @Temperature 68.0 °F |
|
| Specific Heat Capacity | 0.523 J/g-°C @Temperature 20.0 °C |
0.125 BTU/lb-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 28.9 W/m-K | 201 BTU-in/hr-ft²-°F | |
| Melting Point | 1425 °C | 2597 °F | |
| Maximum Service Temperature, Air | 1099 °C | 2010 °F | Operating Temperature |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Iron, Fe | 30 % | 30 % | |
| Nickel, Ni | 70 % | 70 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000199 ohm-cm | 0.0000199 ohm-cm | 3% tolerance on sizes below 0.02, 5% tolerance on sizes above 0.02 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Magnetic | Strong | |
| Temperature Coefficient of Resistance | 0.0045 ohms/ohm-°C | 0-100°C |
| Thermal EMF vs. Copper | -0.04 |
Users viewing this material also viewed the following:
- FKuR Kunststoff Biograde® C 6530 Biodegradable Plastic Compound
- Heatbath/Park Scale Kleen 9 Descaling Salt
- Ineos ABS Lustran® ABS 650 Injection Molding Grade
- Teknor Apex Monprene® MP-1274G Thermoplastic Elastomer
- Teknor Apex Monprene® MP-1531 Thermoplastic Elastomer
- Tra-Con Tra-Bond Ablebond 744-2NTN1 Electrically Insulating Polyimide Adhesive
- Eagle Brass 260 Cartridge Brass, Extra Hard
- Domo Domamid® 2403 T-HS Polyamide 6
- Dow Corning 5-0210 Fluid
- Braskem LL118/21 Blown Film Extrusion Linear Low Density Polyethylene
Copyright © lookpolymers.com All Rights Reserved