Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced |
Manufacturer | BASF |
Trade Name | Ultramid® |
Port | Shanghai port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | BASF Ultramid® B3L BK00464 PA6 (Conditioned).pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.10 g/cc | 0.0397 lb/in³ | ISO 1183 |
Water Absorption | 8.5 - 9.5 % | 8.5 - 9.5 % | Saturation; ISO 62 |
Moisture Absorption at Equilibrium | 2.1 - 2.9 % | 2.1 - 2.9 % | 23°C; 50% RH; ISO 62 |
Linear Mold Shrinkage | 0.0065 cm/cm | 0.0065 in/in | restricted |
Melt Flow | 121 g/10 min @Load 5.00 kg, Temperature 275 °C |
121 g/10 min @Load 11.0 lb, Temperature 527 °F |
ISO 1133 |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 35.0 MPa | 5080 psi | 50 mm/min; ISO 527-1/-2 |
Elongation at Yield | 18 % | 18 % | 50 mm/min; ISO 527-1/-2 |
Modulus of Elasticity | 0.900 GPa | 131 ksi | ISO 527-1/-2 |
Izod Impact, Notched (ISO) | NB @Temperature 23.0 °C |
NB @Temperature 73.4 °F |
ISO 180/A |
Charpy Impact Unnotched | NB @Temperature 23.0 °C |
NB @Temperature 73.4 °F |
ISO 179/1eU |
Charpy Impact, Notched | NB @Temperature 23.0 °C |
NB @Temperature 73.4 °F |
ISO 179/1eA |
Tensile Creep Modulus, 1000 hours | 550 MPa @Strain <=0.500 % |
79800 psi @Strain <=0.500 % |
ISO 899-1 |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Specific Heat Capacity | 1.50 J/g-°C | 0.359 BTU/lb-°F | |
Thermal Conductivity | 0.320 W/m-K | 2.22 BTU-in/hr-ft²-°F | DIN 52612 |
Melting Point | 220 °C | 428 °F | DIN 53765 |
Maximum Service Temperature, Air | 160 °C | 320 °F |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 1.00e+10 ohm-cm | 1.00e+10 ohm-cm | IEC 60093 |
Surface Resistance | 1.00e+10 ohm | 1.00e+10 ohm | IEC 60093 |
Dielectric Constant | 6.4 @Frequency 1.00 Hz |
6.4 @Frequency 1.00 Hz |
IEC 60250 |
Dissipation Factor | 0.24 @Frequency 1.00e+6 Hz |
0.24 @Frequency 1.00e+6 Hz |
IEC 60250 |
Comparative Tracking Index | 600 V | 600 V | Test solution A; IEC 60112 |
Processing Properties | Metric | English | Comments |
---|---|---|---|
Melt Temperature | 250 - 270 °C | 482 - 518 °F | Injection-molding/Extrusion |
Mold Temperature | 40.0 - 80.0 °C | 104 - 176 °F | Injection-molding |
Descriptive Properties | Value | Comments |
---|---|---|
Commercial Status | Europe |